Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
High Gloss Polyester Coating for master models VHG100B x 4 L
Reference
VHG100B
EAN
8431252561179
Stock
Out of stock
€250.00
€250.00 VAT excl.
· Before: €250.00
€302.50 VAT incl. · Spain
Tax excluded
By buying this product you can collect up to
30
points.
Your cart will total 30
points that can be converted into a voucher of
€3.00.
Varnish for finishing based on special polyester resins to achieve surfaces of exceptional quality. Specifically formulated for the nautical sector, where it is used for spray finishing of models requiring a high degree of gloss (High Gloss). Easy to apply, once dry, it allows for the creation of a perfectly workable/processable varnish layer.
Varnish for finishing based on special polyester resins to achieve surfaces of exceptional quality. Specifically formulated for the nautical sector, where it is used for spray finishing of models requiring a high degree of gloss (High Gloss). Easy to apply, once dried it allows to obtain a particularly dry and perfectly manageable varnish layer.
SURFACES
Sanded polyester and vinyl ester surfaces.
GENERAL USE INSTRUCTIONS
- Ensure the surface is clean and the work area is dry, free of dust and silicones.
- Mix carefully.
- Dilute the varnish by adding 5-15% MEK solvent (recommended). The dilution percentage varies depending on the temperature and the desired product consistency.
- Mix slowly to avoid air accumulation.
- Finally, add 1-2% of liquid hardener MEKP (e.g. X8/Luperox K1SN or equivalent), mixing carefully.
- The product can be worked for 15-20 minutes in the cup at a 10% dilution at 23°C.
- Apply with a spray gun to a maximum thickness of 500-600 microns in 4-6 coats of 100-150 microns each.
- Apply each coat with 2 or 3 cross passes, allowing the product to air out and settle for 5 minutes between each coat.
- Use a spray gun with a 1.4-1.7 mm nozzle and a pressure of 2.0-2.5 bars (40 psi).
- Theoretical yield: 1.0-1.2 kg/m² for 600 microns thickness.
- The product can be sanded after 12 hours of application at a temperature of 20°C.
- Typical sanding cycle: by hand with P240-P320-P400, and after 12 hours, P600-P800-P1200 (do not use water).
- Polish the product 12 hours after sanding.
- Do not use at temperatures below 16°C.
- In its original packaging, the product remains stable for 6 months, stored in a dry place at temperatures not exceeding 20°C.
NOTES
- For surface cleaning, do not use silicone-contaminated cloths or cloths that have been in contact with silicone.
TECHNICAL DATA
- Specific weight: 1000 ± 50 g/l
- Color: Black
- Solid content by weight: 50%
- Viscosity (Ford Cup 4, 20°C): 60 ± 5 seconds
- Gloss: 90 ± 5 GU at 60°
- Gel time: 17-23 min
- HDT: 55 ± 5°C
8431252561179
