SphereCel HX Type CM, Core for Infusion and RTM, 2 mm
By buying this product you can collect up to 1 point . Your cart will total 1 point that can be converted into a voucher of €0.10.
SphereCel HX 2 mm is a non-woven core material, compatible with all regular types of resins, including polyester, vinyl ester, phenolic and epoxi.
It is the cost effective solution for closed mold processes, infusion, LRTM, RTM, compression molding.
SphereCel HX 2 mm is a non-woven core material, compatible with all regular types of resins, including polyester, vinyl ester, phenolic and epoxi.
It is the cost effective solution for closed mold processes, infusion, LRTM, RTM, compression molding.
Used as infusion or resin transfer medium/core combination.
Base material: Proprietary veil, volumized with thermoplastic microspheres
Chacteristics: Perforated
Industry: Marine, Transportation, Mass Transit, Leisure, Industrial, and Wind Energy.
Technical information
Value |
|
Thickness |
2,0 mm |
Width |
127 cm |
Roll Length |
70 m |
Weight |
110 g/m2 + 15% |
Weight per roll (approx.) |
7.7 Kg |
Storage
Material should be stored in original packaging, away from humidity, in well-ventilated rooms, at a moderate temperature.
Type of supply
SphereCel HX 2 mm x 1 m, supplied rolled in cardboard tube and box
SphereCel HX 2 mm x 5 m, supplied rolled in cardboard tube and box
SphereCel HX 2 mm x 25 m, supplied rolled in cardboard tube and box
SphereCel HX 2 mm x 70 m (88.90 m2), supplied rolled in plastic film