Flashbreaker® 1 All purpose pressure sensitive tape 2 "
By buying this product you can collect up to 1 point. Your cart will total 1 point that can be converted into a voucher of €0.10.
Flashbreaker® tapes are high temperature/ high tensile polyester films coated on both sides with pressure sensitive silicone adhesive.
Flashbreaker® tapes are high temperature/ high tensile strength polyester films coated with a pressure sensitive silicone adhesive for oven or autoclave cures up to 204°C. The Flashbreaker® tapes have high visibility when placed on parts and molds.
Flashbreaker® pressure sensitive tapes are used for multi-purpose functions in metal bond and composites, such as holding down vacuum bagging materials, thermocouple wires, masking-off, chem-milling protection or in riveting shops. Flashbreaker® tapes remove easily after cure.
• Flashbreaker® tapes can control bond lines and make removal of resin flash easier, reducing clean up effort.
• Fix position of consumable materials to avoid process errors and improve part quality.
• High visibility orange colour makes removal easier to inspect and reduces risk of leaving tape in place.
|Maximum use temperature||204°C|
|Colour||Blue / Orange|
|Total thickness||55 µm (0,0022 inch)|
|Film thickness||25 µm (0,001 inch)|
|Adhesive thickness||30 µm (0,0012 inch)|
|Elongation at break||100 %|
|Shelf life||18 months from date of shipment when
stored in original packaging at 22°C
COMMONLY USED SIZES
|2,54 cm (1 inch)||66 m (72 yards)||60 rolls per case|
|5,08 cm (2 inches)||66 m (72 yards)||30 rolls per case|
Product comes on plastic core, helping to reduce FOD in a clean room environment.
The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, we recommend testing prior to use.