Wind Blades Repair

Repair Materials for Wind Turbine Blades

In this section, we offer fiber and epoxy resin patches, and surface repair fillers for operations on composites, metals, plastics, and wood.

You will also find a good range of repair and filling putties based on polyurethane, polyester, and epoxy systems.

ALEXIT® BladeRep

Scott Bader

Resoltech

SIKA

Showing 1-24 of 77 item(s)

PA80 83 g/m2 Taffeta Weave Peel Ply , 1.25 m wide

PA80 83 g/m2 Taffeta Weave Peel Ply , 0,5 m wide

MPA80BA0500

"PA80" of 83 g/m2 is a taffeta weave polyamide peel ply with standard quality. Peel plies are used to impart a textured surface to the moulded component to improve adhesion in secondary bonding or painting.

€3.78 €4.57 Tax incl. €3.78 Tax excl.

View

Non Woven Breather Felt 150 g/m2, 152 cm wide

150 gsm Non Woven Breather Felt Zetafelt F 3553, width 152 cm

F3553/150

Non woven breather felt made of polyester fibres. Recommended for moulding of elaborate composite parts. Suitable for eliminating any excess of resin from vacuum bagged laminates and ease the debulk process of the laminates, both during wet hand lay-up and prepreg lamination processes.

€3.99 €4.83 Tax incl. €3.99 Tax excl.

View

LDPE Infusion Pipe Ø 10 x 12 mm

PEBD10-12

Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 90 ºC.

€4.15 €5.02 Tax incl. €4.15 Tax excl.

View

PES107 EV2 Polyester Peel Ply, 800 mm wide

MPES107EV2BA0800

PES107 EV2 is a high tenacity plain polyester peel ply designed to be used on epoxy, phenolic and polyester systems. This high tenacity fabric, with or without stripes, leaves a rough surface impression for priming and secondary bonding. Available with stripes (black & yellow) or without stripes. There is no release agent or silicone in the...

Product available with different options

€5.90 €7.14 Tax incl. €5.90 Tax excl.

View

PA80 83 g/m2 Taffeta Weave Peel Ply, 1.25 m wide

WMPA80/1360

€6.30 €7.62 Tax incl. €6.30 Tax excl.

View

PA64 64 g/m2 Taffeta Weave Peel Ply, 200 mm wide

PA64 64 gsm Plain Weave Peel Ply, 200 mm wide

PEELPLY64/200

PA64 Peel ply fabric 100% polyamide with high thermal resistance (190 ºC) to adapt on laminates made with thermosetting resins (epoxy and polyester) and reinforcing fibers in order to obtain rough cured surfaces, once separated of the hardened laminate. Roll width: 200mm Weight: 64 g/m2

€6.93 €8.39 Tax incl. €6.93 Tax excl.

View

Non Woven Breather Felt 150 g/m2, 1.55 m wide

WFEPES150/155

Non woven breather felt made of polyester fibres. Recommended for moulding of elaborate composite parts. Suitable for eliminating any excess of resin from vacuum bagged laminates.

Out-of-Stock

€7.30 €8.83 Tax incl. €7.30 Tax excl.

View

Flat channel for infusion Diadrain 50 mm

DIADRAIN 50 mm Flat Infusion Resin or Vacuum Channel 50 mm

WDIADRAIN50

DIADRAIN is a flat resin or vacuum channel. It consists of a three-dimensional polyester filament core structure wrapped in a non woven polyester sleeve. DIADRAIN is flexible, easy to cut to size and function as resin supply channel or vacuum channel in vacuum infusion process.

€7.31 €8.84 Tax incl. €7.31 Tax excl.

View

LDPE Infusion Pipe Ø 14 x 16 mm

PEBD14-16

Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 75 ºC.

€7.56 €9.15 Tax incl. €7.56 Tax excl.

View

800 g/m2 Biaxial glass cloth (+45°/-45°)

800 gsm (+45°/-45°) Biaxial Glass Fabric, 127 cm

WTVBX800

Biaxial glass fabric of 800 /m2 built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

€7.65 €9.26 Tax incl. €7.65 Tax excl.

View

$610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide$

610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide

TVBX610

SAERTEX

Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy. Widely used for processes where a very good mechanical strength combined with...

Out-of-Stock

€7.90 €9.56 Tax incl. €7.90 Tax excl.

View

800 g/m2 Biaxial Glass Cloth (0°/90°), 127 cm

800 g/m2 Biaxial Stitched Glass Fabric (0°/90°), 127 cm

LT800-0/90

Biaxial glass fabric of 800 /m2 built of two layers of unidirectional fabric oriented at 0º and 90º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

€7.95 €9.62 Tax incl. €7.95 Tax excl.

View

450 g/m2 Biaxial glass cloth (+45°/-45°), 127 cm wide

450 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), 127 cm wide

WTVBX450

Biaxial glass fabric of 450 g/m2 built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

€8.20 €9.92 Tax incl. €8.20 Tax excl.

View

600 g/m2 Biaxial Stitched Glass Fabric (0°/90°), 127 cm wide

WTBX600

Biaxial glass fabric built of two layers of unidirectional fabric oriented at 0º and 90º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

€8.40 €10.16 Tax incl. €8.40 Tax excl.

View

ELA20 Perforated Release Film 25 microns

WFIELA20P3100

ELA20 is a polyethylene copolymer perforated release with P3 type holes. Used between the peel ply and the breather cloth during the vacuum bagging process. Allows the flow of air trapped and excess of resin in the laminates.

€8.82 €10.67 Tax incl. €8.82 Tax excl.

View

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 250 g/m2, 127 cm wide

XM600/250

Combi Mat Biaxial E-glass is ideal for laminates with polyester, vinyl ester and epoxy resins. Made with a 600 g/m2 biaxial glass fabric stitched to a 250 g/m2 emulsion chopped strand mat. Especially recommended as high performance structural reinforcement for large composite parts. Very used for the production of composite boats, windblades and any...

Out-of-Stock

€8.95 €10.83 Tax incl. €8.95 Tax excl.

View

600 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), 127 cm wide

WTVBX600

€9.68 €11.71 Tax incl. €9.68 Tax excl.

View

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 300 g/m2, 125 cm wide

XM600/300

Combi Mat Biaxial E-glass is ideal for laminates with polyester, vinyl ester, epoxi and urethane-acrylate resins. Made with a 600 g/m2 biaxial glass fabric stitched to a 300 g/m2 emulsion chopped strand mat. Especially recommended as high performance structural reinforcement for large composite parts. Very used for the production of composite boats,...

€10.10 €12.22 Tax incl. €10.10 Tax excl.

View

Sealant Tape LSM4200 High Stickiness (140 ºC)

WVC4200

LSM4200 is a sealing putty for vacuum bags with thermal resistance up to 140ºC.

€10.40 €12.58 Tax incl. €10.40 Tax excl.

View

Crystic R115PA Hand Lay-UP Ortho Polyester Resin

WRP0115A

Scott Bader

Crystic R115PA is a thixotropic, accelerated, orthophtalic general purpose unsaturated polyester resin. CRYSTIC R 115 PA can be used by hand lay up or by spray application for the production of most glass reinforced laminates.

€11.70 €14.16 Tax incl. €11.70 Tax excl.

View

Crystic 489PA35 Hand Lay-Up Isophthalic Polyester Resin

WRP0489PA35

Scott Bader

Crystic 489PA35 is an isophthalic, thixotropic, and pre-accelerated unsaturated polyester resin. Ideal for the manufacture of laminates with reinforcing fibers in nautical applications and in shipbuilding. It is a formulation with gel time 33 to 37 min at 25ºC and with 2% PMEC catalyst. It has a Lloyd's Register of Shipping certificate.

Out-of-Stock

€11.90 €14.40 Tax incl. €11.90 Tax excl.

View

837 g/m2 Triaxial Stitched Glass Fabric (0º/+45º/-45º), Saertex Y-E 1270 mm wide

TVTX837

SAERTEX

Triaxial glass fabric of 837 g/m2 built of three layers of unidirectional fabric oriented at 0º, +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

€11.98 €14.49 Tax incl. €11.98 Tax excl.

View

Crystic 489 PABTLV Hand Lay-Up Isophthalic Polyester Resin

WRP1489

Scott Bader

Crystic 489 PABTLV is a thixotropic, isophthalic and pre-accelerated polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for moulding boat hulls with outstanding durability and superior blister resistance. Crystic 489 PABTLV is approved by Lloyd’s Register of Shipping for use in the construction of craft under...

€12.10 €14.64 Tax incl. €12.10 Tax excl.

View

Mastic sealing for vacuum bag LSM7000 (High temperature)

Sealant Tape LSM7000 (210 ºC)

WVC7000

Sealant tape for vacuum bag with heat resistance up to 210 °C.

€13.34 €16.14 Tax incl. €13.34 Tax excl.

View