Tax incl. Tax excl.

Pigments, Fillers and Additives

Pigments, Fillers, and Additives for Resins

In this section, we offer all kinds of curing additives necessary for the polymerization of thermosetting polyester and vinyl ester resins, their gel coats, and top coats of the same type; as well as all kinds of products to modify the properties of the resins: pigments, mineral or thermoplastic fillers, and a complete range of solvents or substitutes for cleaning brushes and rollers.

Of particular importance are the cleaners used as an alternative to acetone, as they are liquids that displace resins and gel coats from brushes and rollers without diluting them. These products are non-volatile, non-toxic, and non-flammable, so they are not considered hazardous goods for transport.

Pigments / Dyes
Pigments / Dyes
Solvents & MW Solution
Solvents & MW Solution
Peroxide catalysts
Peroxide catalysts
Mineral & Plastic fillers
Mineral & Plastic fillers
Silica Sand N.º 2

Quartz Sand Filler

Sieved silica / quartz sand filler dried for mixing with any type of termosetting resin, for casting, epoxy flooring (mortars and anti-skid surfaces).
€1.80 €2.18 Tax incl. €1.80 Tax excl.
View
Hydroalcoholic gel

Hydroalcoholic gel x 100 ml

0000-100
Hydroalcoholic antiseptic gel for healthy skin.
€2.50 €3.03 Tax incl. €2.50 Tax excl.
Micronized talc

Micronized Talc

WAA0120
Mineral filler, also known as magnesium silicate, specially used in combination with polyester, vinyl ester and epoxy resins to manufacture, at lower costs, parts by casting techniques.
€2.95 €3.57 Tax incl. €2.95 Tax excl.
View
Y-3 Accelerant (cobalt octoate 6%)

Y-3 Cobalt Octoate 6% Activator

WAA3333
Cobalt octoate 6% type activator suitable for polyester and vinyl ester resins.
€3.50 €4.24 Tax incl. €3.50 Tax excl.
View
Particles non-slip 112

Particles Non-Slip 112

WPD0112
Particles of small micraje to add to epoxy resins and paints for polyurethane, in order to obtain rough surfaces are non-slip. Widely used for painting a multitude of structures, equipment, floors etc in order to get non-slip surfaces.
€3.60 €4.36 Tax incl. €3.60 Tax excl.
View
Microcuarzo Q-50

Microcuarzo Q-50

WAA0150
Microcuarzo 5 kg Q-50
€3.75 €4.54 Tax incl. €3.75 Tax excl.
View
Dye Translucent, Concentrated Blue

Translucent Concentrated Black Dye for Clear Epoxy Resins and Varnishes

DTH9002D
Dye concentrate for coloring varnishes and resins. Suitable for outdoors (as long as the binder that we add to be suitable for exterior). Add between 1% and 5%. Valid for products, the solvent and the water.
€3.90 €4.72 Tax incl. €3.90 Tax excl.
View
Catalyst X -8: (methylethylketone peroxide 50%)

Luperox K12G MEKP Catalyst for Vinyl Ester and Polyester Resins

WAA9999
Luperox® K12G is a Methyl Ethyl Ketone Peroxide phthalate free. In ortho- and isophthalic resins, Luperox® K12G gives long gel time and is therefe particularly recommended for the manufacture of very large molded pieces when the room temperature is elevated.
Last items in stock
€3.90 €4.72 Tax incl. €3.90 Tax excl.
View
Ocher Pigment

Ochre 4030 Pigment Paste

WCP4030
Medium viscosity pigment paste for polyester or vinyl ester resins, gel coats and top coats of the same type.
€4.00 €4.84 Tax incl. €4.00 Tax excl.
View
Carbonate calcium

Calcium Carbonate (1-2 mm)

WAA0102
Calcium carbonate is a mineral filler ideal for reducing the cost of thermosetting resins in casting applications, fillers or putties, etc. Specially used in combination with polyester resins for polymer concrete applications.
€4.00 €4.84 Tax incl. €4.00 Tax excl.
View
Carbonate calcium

Calcium Carbonate (0.1-0.63 mm)

WAA0105
Calcium carbonate is a mineral filler ideal for reducing the cost of thermosetting resins in casting applications, fillers or putties, etc. Specially used in combination with polyester resins for polymer concrete applications. Particle size: 10 microns
€4.00 €4.84 Tax incl. €4.00 Tax excl.
View
Carbonate calcium

Calcium Carbonate (10 microns)

WAA0100
Calcium carbonate is a mineral filler ideal for reducing the cost of thermosetting resins in casting applications, fillers or putties, etc. Specially used in combination with polyester resins for polymer concrete applications. Medium diameter of particle: 10 microns
€4.00 €4.84 Tax incl. €4.00 Tax excl.
View
Dye Translucent, Concentrated Red

Translucent Concentrated Red Dye for Clear Epoxy Resins and Varnishes

DTH6411D
Dye concentrate for coloring varnishes and resins. Suitable for outdoors (as long as the binder that we add to be suitable for exterior). Add between 1% and 5%. Valid for products, the solvent and the water.
Out-of-Stock
€4.50 €5.45 Tax incl. €4.50 Tax excl.
View
Dye Translucent, Concentrated Blue

Translucent Concentrated Blue Dye for Clear Epoxy Resins and Varnishes

DTH4002
Dye concentrate for coloring varnishes and resins. Suitable for outdoors (as long as the binder that we add to be suitable for exterior). Add between 1% and 5%. Valid for products, the solvent and the water.
€4.80 €5.81 Tax incl. €4.80 Tax excl.
View
White pigment 501

White 501 Pigment Paste

WCP0501
Medium viscosity pigment paste for polyester or vinyl ester resins, gel coats and top coats of the same type.
€4.89 €5.92 Tax incl. €4.89 Tax excl.
View
Dark Grey Pigment

Dark Grey 200966 Pigment Paste

WCP0966
Medium viscosity pigment paste for polyester or vinyl ester resins, gel coats and top coats of the same type.
€4.95 €5.99 Tax incl. €4.95 Tax excl.
View
Dimethylaniline DMA 10%...

Dimethylaniline DMA 10% solution Accelerator

WAC0010
Dimethylaniline DMA 10% solution Accelerator commonly used for polyester, vynil ester and urethane-acrylate resins
€5.00 €6.05 Tax incl. €5.00 Tax excl.
View
Light Grey Pigment

Light Grey 250766 Pigment Paste

WCP0766
Medium viscosity pigment paste for polyester or vinyl ester resins, gel coats and top coats of the same type.
€5.00 €6.05 Tax incl. €5.00 Tax excl.
View
Navy Blue Pigment 541

Navy Blue 541 Pigment Paste

WCP0541
Medium viscosity pigment paste for polyester or vinyl ester resins, gel coats and top coats of the same type.
€5.25 €6.35 Tax incl. €5.25 Tax excl.
View
Pyrogenic Silica N20ST (thixotropic agent 003)

Pyrogenic Silica Orisil (thixotropic agent 003)

WAA0030
Synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis. Standard product for industrial applications.Specially used for improving the thixotropy of polyester and vinyl ester resins.
Out-of-Stock
€5.50 €6.66 Tax incl. €5.50 Tax excl.
View
Product added to wishlist
WhatsApp