Release agents and mould preparation

Products for preparing composite models and moulds: coatings, polishing products, sealers and release agents. Choose by stage of work, from master-model preparation to the mould release system.

Mould and model preparation

Mould release agents and sealers

Showing 25-48 of 52 item(s)

ZYVAX Waterclean water-based mold cleaner Waterclean

Mould release agents and sealers

Zyvax® WaterClean Water-Based Mould Cleaner

WMD0166

€30.90 €30.90 VAT excl.

Zyvax® WaterClean has been developed to provide an effective, water-based alternative to solvent washing for the removal of surface contaminants from moulds and moulded parts. Zyvax® WaterClean eliminates solvent washing when preparing parts for painting, bonding or other processes that require a completely clean surface.

View product

Mould and model preparation

Red wax for modelling

24001051

€34.20 €34.20 VAT excl.

Wax of general use for modelling and preparation of models. Resists the contact with the resins of polyester, vinylester, and epoxy.

View product

Mould and model preparation

Mirka Polarshine 25 Fine Polishing Paste

€35.00 €35.00 VAT excl.

Polarshine 25 is a compound for polishing of gelcoats and topcoats. It is suitable for polishing and removal of sanding marks from P800 and finer depending on application and polishing pad with Mirka’s unique products. Polarshine 25 is suitable for machine application.

View product

Mould and model preparation

300 g/m2 Carbon Fibre Mat, 127 cm wide

MATCAR300/127

€35.09 €35.09 VAT excl.

Carbon Mat reinforcement ideal for hand lay-up and infusion laminates with any kind of thermosetting resin: epoxy, urethane-acrylate or vinyl ester.

View product

Mould and model preparation

Polishing Foam Pad 150x25mm Yellow Waffle, 2/Pack

WUU7993415021

€35.85 €35.85 VAT excl.

Polishing Foam Waffle to adapt to the 150 mm diameter Mirka polisher plate.

View product

Mould release agents and sealers

Mould Release Paste WAX OSKARS M 700/C

WMD0700-0.7

€36.65 €36.65 VAT excl.

Especially formulated for easier application to polyester- and epoxy moulds. Highly heat-resistant (80-100ºC).Provides outstanding mould protection and easy release of finished parts. Formulated to prevent wax build-up.

View product

Mould and model preparation

Lambswool Pad Pro 150mm Grip, 2/Pack

WUU7991500211

€36.80 €36.80 VAT excl.

Lambswool for polishing models, moulds and composite parts. Diameter 150 mm dish of Mirka polisher.

View product

Mould and model preparation

7890F Polishing Paste

WMP7890-1.5

€39.00 €39.00 VAT excl.

Polsihing paste suitable fot moulds and master models produced with thermoset resins or with final coats of highbuilds, varnishes or topcoats.

View product

Mould and model preparation

Mirka Polarshine 10 Medium Coarse Polishing Compound

WUU7995010111-1

€39.99 €39.99 VAT excl.

An ultimate single compound system. Polarshine 10 is a medium coarse polishing compound especially designed for achieving the best result after sanding with Mirka’s unique products. Polarshine 10 is suitable for all paint systems and for polishing of scratch resistant clear coats. Polarshine 10 is silicon free and can be used for both machine and hand...

View product

Mould and model preparation

Mirka Polarshine 45 Polishing Paste

7994510111-1

€46.50 €46.50 VAT excl.

Polarshine 45 is a compound for polishing of gelcoats and topcoats. It is suitable for polishing and removal of sanding marks from P1000 and finer depending on application and polishing pad with Mirka’s unique products. Polarshine 25 is suitable for machine application.

View product

Release agent Teflon film V7PT80 with adhesive PTFE 70 micron

Mould release agents and sealers

80 microns PTFE Teflon-Coated Glass Fabric V7PT80

WV7PT80AD1000

€49.19 €49.19 VAT excl.

Nonporous polytetrafluoroethylene (PTFE) film, better known as Teflon, used as demoulding film on models and moulds in composites processes, especially in the manufacture of parts or prepregs moulds.

View product

Aramide fibre plain weave 61 g/m2 Style 120

Mould and model preparation

61 gsm Plain Weave Aramide Fibre Cloth Style 120, 120 cm wide

TKEVLAR60/120

€54.15 €54.15 VAT excl.

Very low weight aramid plain fabric easily drapable to any surface. Ideal for cosmetic applications in ultra-light composite parts. Also suitable when impact and fire resistance are required. Recommended for use with thermosetting resins, especially epoxy, vinyl ester or urethane-acrylates (Crestapol). Widely used in hand lay-up applications, vacuum...

View product

Home

Chemlease® PMR MS EU

ChemleasePMRM

€57.00 €57.00 VAT excl.

Chemlease® PMR MS EU is a solvent-based semi-permanent release agent designed for composites molding applications. It is ideal for releasing complex-shaped parts while maintaining a Class A, high-gloss finish and excellent high-temperature stability.

View product

Home

Chemlease® PMR HS EU

ChemleasePMRHS

€57.00 €57.00 VAT excl.

Chemlease® PMR HS EU is a solvent-based semi-permanent release agent designed for composites molding applications. It is ideal for releasing challenging resins while maintaining a Class A, high-gloss finish.

View product

Mould release agents and sealers

Sealer Mikon® 399 MC

MIKON399 MC

€72.50 €72.50 VAT excl.

Mikon® 399 MC is a specially designed surface sealer for porous surfaces to seal them with a high gloss finish. The sealing impresses with its simple application. If handled properly, you neither have to sand nor to polish.

View product

Mould and model preparation

Crystic Primecoat Polyester High Build

Scott Bader

WGC0001

€104.05 €104.05 VAT excl.

Crystic Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc.

View product

Home

Mold Cleaner CleanWiz-9/NC - CFC & Chlorinated-Free (5L)

DD0009

€140.00 €140.00 VAT excl.

Solvent-based stripper for cleaning molds and metals. Removes resins, waxes, greases, and release agents. Free from CFCs and chlorinated solvents.

View product

Home

Mikon 2480 release agent

MC2480

€154.80 €154.80 VAT excl.

Release Agent Mikon® 227 MC is an ultra-fast evaporating, multi-purpose semi-permanent mould release agent that is used to release most thermosetting resins from gelcoated and non-gelcoated mould materials.

View product

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 945 mm wide

Mould and model preparation

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 800 mm wide

SAERTEX

TCBX304-800

€219.00 €219.00 VAT excl.

304 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 149 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...

View product

Tools and equipment for composites

Mirka PROS 650CV 150mm Pneumatic Sander with Central Vacuum Orbit 5.0

WUU150650N

€430.95 €430.95 VAT excl.

The pneumatic sander - MIRKA PROS ® 650cv (Central Vacuum) was created with smart features and great detail resulting in an efficient and effective tool sanding, perfect for professional traders.

View product

Mirka DEROS 650CV 150mm Central Vacuum Orbit 5,0

Tools and equipment for composites

Mirka DEROS 650CV 150mm Electric Sander 230V

WUU150650

€573.00 €573.00 VAT excl.

Mirka DEROS 650CV direct electric random orbital sander is equipped with a 150 mm (6”) pad and has a 5.0 mm oscillation. Mirka DEROS 650CV is the first ever electric sanding machine with a brushless motor and no external power supply.

View product

Tools and equipment for composites

Mirka POLAROS RP 600 150 mm rotary polisher

MRP6002100

€599.00 €599.00 VAT excl.

The Mirka POLAROS RP 600 150 mm is a corded rotary polisher for gelcoat, topcoat and painted or clearcoated surfaces. It features a 750 W brushless motor, adjustable speed from 700 to 2,500 rpm, Ramp Up and Ramp Down functions and Bluetooth connectivity with myMirka. Supplied with a 135 mm soft backing pad for 150 mm polishing pads.

View product

Out-of-Stock

Mould and model preparation

Mirka Porlarshine 35 Coarse Polishing Compound

WUU7992810111

€29.45 €29.45 VAT excl.

Polarshine 35 is a coarse polishing compound developed for demanding Industrial and Marine applications. Polarshine 35 is suitable for materials such as gel coats, high gloss lacquers and composites. This product has a faster and more efficient compound and produces a high surface gloss. By using Polarshine 35 you are able to minimize the sanding steps.

View product

Out-of-Stock

Finishing and polishing products for composites

G3 Premium Abrasive Compound x 1 kg

3001-7022

€36.50 €36.50 VAT excl.

G3 Premium Abrasive Compound is the only compound needed to permanently remove P1500 or finer sanding marks from all modern paint systems, while leaving a swirl free, high gloss finish with reduced product consumption.

View product

Release agents and mould preparation

Zyvax® WaterClean Water-Based Mould Cleaner

Red wax for modelling

Mirka Polarshine 25 Fine Polishing Paste

300 g/m2 Carbon Fibre Mat, 127 cm wide

Polishing Foam Pad 150x25mm Yellow Waffle, 2/Pack

Mould Release Paste WAX OSKARS M 700/C

Lambswool Pad Pro 150mm Grip, 2/Pack

7890F Polishing Paste

Mirka Polarshine 10 Medium Coarse Polishing Compound

Mirka Polarshine 45 Polishing Paste

80 microns PTFE Teflon-Coated Glass Fabric V7PT80

61 gsm Plain Weave Aramide Fibre Cloth Style 120, 120 cm wide

Chemlease® PMR MS EU

Chemlease® PMR HS EU

Sealer Mikon® 399 MC

Crystic Primecoat Polyester High Build

Mold Cleaner CleanWiz-9/NC - CFC & Chlorinated-Free (5L)

Mikon 2480 release agent

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 800 mm wide

Mirka PROS 650CV 150mm Pneumatic Sander with Central Vacuum Orbit 5.0

Mirka DEROS 650CV 150mm Electric Sander 230V

Mirka POLAROS RP 600 150 mm rotary polisher

Mirka Porlarshine 35 Coarse Polishing Compound

G3 Premium Abrasive Compound x 1 kg

Departments

Opening hours