Tax incl. Tax excl.
Crestomer 1153 PA Urethane acrylate adhesive

Crestomer 1153 PA Urethane Acrylate Adhesive

WCR1153-1
0 Item
Out-of-Stock
€35.70
€43.20 Tax incl. €35.70 Tax excl.
Tax excluded

By buying this product you can collect up to 4 point points. Your cart will total 4 points that can be converted into a voucher of €0.40.

Crestomer 1153PA is a highly thixotropic, pre-accelerated, two-component structural adhesive. It has been developed from the chemistry of unsaturated acrylates urethane dissolved in styrene monomer.

Choose the type of supply

Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

Crestomer 1153PA is a highly thixotropic, pre-accelerated, two-component structural adhesive. It has been developed from the chemistry of unsaturated acrylates urethane dissolved in styrene monomer.

It has a long working time of 90 minutes. It is used in many structural composite material applications and has excellent adhesion to fiber-reinforced plastic laminates, cores, wood, and some metals. Due to its excellent adhesion to a wide range of materials, 1153PA can also be used as a general purpose adhesive. It can be used to glue diesel tanks, perimeter joints in composite parts, to rebuild damaged areas and to glue fiber reinforced plastics that are still green.

 

Features and Benefits

  • Acrylic urethane resin base ----) Improved cosmetic and better surface finish
  • Excellent retention of toughness ----) Excellent adhesion and high elongation at break
  • Very thixotropic ----) Does not sag on vertical walls
  • Cured and exothermic under control ---) Perfect solution for gap filling
  • Excellent resistance to fatigue and impact

Type of supply

Crestomer 1153 PA x 1 kg, supplied with 20 g of MEKP catalyst

Crestomer 1153 PA x 5 kg, supplied with 100 g of MEKP catalyst

Crestomer 1153 PA x 25 kg, supplied with 0,5 kg of MEKP catalyst

8431252547593

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as DACHSER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR/DPD and GLS.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

Y-3 Cobalt Octoate 6% Activator ........................................................ 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR/DPD or GLS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Dachser.

* Shippings to Portugal will be always carried by Torrestir

You might also like

Customers who bought this product also bought:

Product added to wishlist