Tax incl. Tax excl.

List of products by brand Scott Bader

CRYSTIC SOLUTION MW Paraffin Solution

WAA0020
 (4)
MW, solution in styrene to be added to polyester and vinyl ester resins to improve the surface finish. It eliminates the surface tack of polyester and vinylester resins.
€6.60 €6.60 Tax incl. €5.45 Tax excl.

Crystic 446PALV Low Exotherm Hand Lay-Up & Spray Up Polyester Resin

WRP0446
Crystic Resin 446PALV is a pre-accelerated, thixotropic, spray viscosity orthophthalic polyester resin. This laminating resin has rapid wet-out, low exotherm and fast hardening characteristics making it ideal for rapid mould turnaround. It contains a colour change system and will change from blue to to natural colour when the catalyst is added to the...
€11.50 €11.50 Tax incl. €9.50 Tax excl.

Crystic R115PA Hand Lay-UP Ortho Polyester Resin

WRP0115A
 (2)
Crystic R115PA is a thixotropic, accelerated, orthophtalic general purpose unsaturated polyester resin. CRYSTIC R 115 PA can be used by hand lay up or by spray application for the production of most glass reinforced laminates.
€11.51 €11.51 Tax incl. €9.51 Tax excl.

Crystic R115PAV01 Hand Lay-up Flexible Orthophthalic Polyester Resin

WR0115AF
 (2)
CRYSTIC R115PAV01 is a flexible, pre-accelerated, orthophtalic unsaturated polyester resin that can be used by hand lay up or by spray application for the production of most glass reinforced laminates. This resin can also be used for casting applications.
€11.54 €11.54 Tax incl. €9.54 Tax excl.

Crystic 198 Heat and Chemical Resistant Polyester Resin

WRP0198
Crystic Resin 198 is a medium viscosity orthophthalic polyester resin with good heat and chemical resistant properties. Developed for use in the chemical industry - tanks, pipes , fumestacks etc where heat and chemical resistance are both required but can also be used in industrial, transportation and building and construction applications.
Out-of-Stock
€13.31 €13.31 Tax incl. €11.00 Tax excl.

Crystic R115PA White Hand Lay-Up Orthophthalic Polyester Resin

WRP0115AB
 (1)
Crystic R115PA is a thixotropic, accelerated, orthophtalic general purpose withe pigmented unsaturated polyester resin that can be used by hand lay up or by spray application for the production of most glass reinforced laminates.
€14.05 €14.05 Tax incl. €11.61 Tax excl.

Crystic 65PA White 337 Brush Polyester Gelcoat

WGC0337B
 (2)
Crystic Gelcoat 65PA is a pre-accelerated, isophthalic gelcoat. It has been formulated for brush application, but spray versions are available.
€14.16 €14.16 Tax incl. €11.70 Tax excl.

Crystic 489 PABTLV Hand Lay-Up Isophthalic Polyester Resin

WRP1489
Crystic 489 PABTLV is a thixotropic, isophthalic and pre-accelerated polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for moulding boat hulls with outstanding durability and superior blister resistance. Crystic 489 PABTLV is approved by Lloyd’s Register of Shipping for use in the construction of craft under...
Out-of-Stock
€14.52 €14.52 Tax incl. €12.00 Tax excl.

Crystic 489PA35 Hand Lay-Up Isophthalic Polyester Resin

WRP0489PA35
Crystic 489PA35 is an isophthalic, thixotropic, and pre-accelerated unsaturated polyester resin. Ideal for the manufacture of laminates with reinforcing fibers in nautical applications and in shipbuilding. It is a formulation with gel time 33 to 37 min at 25ºC and with 2% PMEC catalyst. It has a Lloyd's Register of Shipping certificate.
€14.52 €14.52 Tax incl. €12.00 Tax excl.

Crestafix® 90-84PA Low Density Polyester Bonding Paste

WRP9084
Crestafix 90-84PA is a light weight, low exotherm, pre-accelerated orthophathalic polyester bonding paste. It is a non-sagging compound, designed for non-structural applications where gap filling may be a secondary requirement.  Crestafix 90-84PA has been specifically designed to give weight saving properties and for ease of application.
Last items in stock
€15.97 €15.97 Tax incl. €13.20 Tax excl.

Crystic 90-82PA Orthophthalic Polyester Bonding Paste

WRP9082
Crystic BP 90-82PA is pre-accelerated polyester bonding paste. It is a viscous, white and filled compound containing a flexible additive, specifically designed for the assembly and bonding of GRP mouldings. Such applications include panels, inserts, internal frames, ribs, composite constructions and car body components. The use of these bonding pastes...
€16.09 €16.09 Tax incl. €13.30 Tax excl.

Crestafix 90-80PA Bonding Paste with Glass Fibres

WRP9080
 (1)
Crystic BP 90-80PA is a pre-accelerated orthophthalic polyester bonding paste which is reinforced with 3mm glass fibres. This product exhibits exceptional mechanical and handling properties, has low shrinkage and has better resistance to impact.
€16.09 €16.09 Tax incl. €13.30 Tax excl.

Low Styrene Content White 337 Spray Polyester Gelcoat Crystic LS97PA

WGC0337P
Crystic Gelcoat LS 97PA is a high performance low styrene content isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. This product is available in a wide range of colours and the information contained in its datasheet also applies to pigmented versions.  
Out-of-Stock
€16.94 €16.94 Tax incl. €14.00 Tax excl.

Crystic Gelcoat 65PA Isophthalic Brush Clear Gelcoat

WGC0006B
 (4)
Crystic Gelcoat 65PA is a pre-accelerated, isophthalic gelcoat. It has been formulated for brush application, but spray versions are available. Crystic Gelcoat 65PA is available in a wide range of colours and the information contained in this technical data sheet also applies to these pigmented versions. A non-accelerated version, Crystic Gelcoat 65, can...
€17.55 €17.55 Tax incl. €14.50 Tax excl.

Crystic Topcoat 65PAX Clear Brush Isophthalic Polyester Topcoat

WTC0001
Crystic Topcoat 65PAX is a pre-accelerated, isophthalic topcoat. It has been formulated for brush application and is available in a restricted range of colours. Crystic Topcoat 65PAX is designed for use where a smooth finish is required on the reverse side of a laminate. Deflection Temperature Under Load (1.80 MPa): 75 ºC.
€17.85 €17.85 Tax incl. €14.75 Tax excl.

Crystic RTR4010PA Rapid Tooling Low Profile Polyester Resin

RTR4010
Crystic RTR 4010PA is a new, improved rapid tooling resin which incorporates better handling properties, lower viscosity, improved shrinkage control and is catalysed with standard MEKP catalyst.  RTR 4010PA is a thixotropic, filled, low profile resin for hand-lay mould making applications. RTR 4010PA helps to achieve faster mould making and eliminates...
€17.85 €17.85 Tax incl. €14.75 Tax excl.

Crystic Filler X401 Grey RAL 7035 Gap Filling Polyester Putty

WRPM0401
 (2)
CRYSTIC FILLER X 401 is a pre accelerated highly thixotropic polyester compound, specially designed for surface finish at joint line. Application CRYSTIC FILLER X 401 has been developed for filling gaps at the joint line between the halves of wind mill blades.
€18.03 €18.03 Tax incl. €14.90 Tax excl.

Crestabond M1-02 two component acrylic adhesive

Crestabond M1-02 is a toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals.
€19.36 €19.36 Tax incl. €16.00 Tax excl.

Crystic 253PA Epoxy Compatible Clear Spray Polyester Gel Coat

WGC253I
 (1)
Crystic Gelcoat 253PA is a thixotropic, pre-accelerated, isophthalic gelcoat designed as an in-mould gelcoat with excellent adhesion to epoxy resins without the need for a tie-coat. Formulated for spray application. The use of Resoltech 1050 epoxy resin is recommended.
Out-of-Stock
€19.42 €19.42 Tax incl. €16.05 Tax excl.

Crestafix 621CC 45 urethane acrylate / isophthalic polyester bonding paste

WRPM62145
The Crestafix 621CC range is a pre-accelerated urethane acrylate / isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP mouldings.
€19.54 €19.54 Tax incl. €16.15 Tax excl.

Crestabond M1-05 Black Methacrylate Adhesive

WCR005/50
Black methacrylate adhesive for bonding metals (aluminum, steel , etc.), plastic (ABS , polycarbonate, PVC and methacrylate) and FRP (reinforced plastics: fiberglass composites, carbon, etc.).
Out-of-Stock
€19.72 €19.72 Tax incl. €16.30 Tax excl.

Crestafix 630PA Vinylester Bonding Paste

 (1)
Crestafix 630PA is pre-accelerated vinylester based high performance bonding paste. It is a non-sagging, filled compound with high strength, specifically designed for the assembly and bonding of GRP mouldings.
€19.72 €19.72 Tax incl. €16.30 Tax excl.

Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD Resin

WRV0679
 (1)
Crystic Resin VE679PA is a pre-accelerated thixotropic DCPD modified vinylester resin. Developed for use as a skin coat in marine and tooling applications. Excellent blister resistance and reduced print through.  It has a 23 minute geltime and is Lloyd´s Register approved.
€20.27 €20.27 Tax incl. €16.75 Tax excl.

Crystic VE676T AC High Chemical Resistance Vinyl Ester Resin

WRV0676
 (1)
Crystic Resin VE676 is an epoxy bisphenol A based, vinyl ester with excellent chemical resistance (acid, alkalies and oxidising agents). Suitable for many chemical processing applications (storage tanks, vessels, ducts) via a range of techniques (contact moulding, filament winding, injection moulding).
Product available with different options
€20.51 €20.51 Tax incl. €16.95 Tax excl.

Crystic 253PA Epoxy Compatible White Spray Polyester Gel Coat

WGC253WHITE
 (2)
Crystic Gelcoat 253PA is a thixotropic, pre-accelerated, isophthalic gelcoat designed as an in-mould gelcoat with excellent adhesion to epoxy resins without the need for a tie-coat. Formulated for spray application. The use of Resoltech 1050 epoxy resin is recommended. Crystic Gelcoat 253PA is designed for use with wet lay and vacuum injected epoxy systems.
€20.69 €20.69 Tax incl. €17.10 Tax excl.

Crystic Topcoat 65PAX Red 6140 Brush Isophthalic Polyester Top Coat

WTC6140
Crystic Topcoat 65PAX red 6140 is a pre-accelerated, isophthalic topcoat. It has been formulated for brush application and is available in a restricted range of colours. Crystic Topcoat 65PAX red 6140 is designed for use where a smooth finish is required on the reverse side of a laminate.
€20.93 €20.93 Tax incl. €17.30 Tax excl.

Crystic Topcoat 65PAX White 337 Brush Isophthalic Polyester Topcoat

WTC0007
 (1)
Crystic Topcoat 65PAX white 337 is a pre-accelerated, isophthalic topcoat. It has been formulated for brush application and is available in a restricted range of colours. Crystic Topcoat 65PAX white 337 is designed for use where a smooth finish is required on the reverse side of a laminate.
€20.93 €20.93 Tax incl. €17.30 Tax excl.

Crestabond M7-05 Methacrylate Adhesive

WCRM705
Methacrylate adhesive for bonding metals (aluminum, steel , etc. ) , plastic ( ABS , polycarbonate , PVC and methacrylate ) and FRP ( reinforced plastics : fiberglass composites , carbon , etc.) .
€21.30 €21.30 Tax incl. €17.60 Tax excl.

Crystic Barriercoat 550PA, Isophthalic Polyester Barriercoat for Improved Aesthetics White 337

BC0550PAW337
Crystic Barriercoat 550PA is an isophthalic barriercoat formulated for brush application. Crystic Barriercoat 550PA is recommended for use where good surface aesthetics are required for glass reinforced laminates.  It is particularly recommended for use behind dark colour gelcoats and for vacuum infusion.
€21.65 €21.65 Tax incl. €17.89 Tax excl.

Crestabond M1-20 Black Methacrylate Adhesive

WCR0020/50
Black methacrylate adhesive for bonding metals (aluminum, steel , etc.), plastic (ABS , polycarbonate, PVC and methacrylate) and FRP (reinforced plastics: fiberglass composites, carbon, etc.).
Out-of-Stock
€22.39 €22.39 Tax incl. €18.50 Tax excl.

Crystic VE 677 PA High Chemical Resistance Epoxy Bisphenol Vinyl Ester Resin

WRV0677
CRYSTIC VE 677 PA is a vinyl ester resin based on epoxy bisphenol A. It is thixotropic and pre accelerated. CRYSTIC VE 677 PA has excellent chemical resistance to a wide range of substances (acids, alkalies and oxidising agents). Crystic VE 677 PA utilises isophthalic UP resin as an additive in order to achieve favourable handling performance...
€22.93 €22.93 Tax incl. €18.95 Tax excl.

Crystic Topcoat 65PAX Black 505 Brush Isophthalic Polyester Topcoat

WTC0505
 (2)
Crystic Topcoat 65PAX Black 505 is a pre-accelerated, isophthalic topcoat. It has been formulated for brush application and is available in a restricted range of colours.  Crystic Topcoat 65PAX Black 505 is designed for use where a smooth finish is required on the reverse side of a laminate.
€23.90 €23.90 Tax incl. €19.75 Tax excl.

Crestapol 1260 Urethane Acrylate Resin

RP1260
 (7)
Crestapol 1260 is a low viscosity urethane acrylate resin for use in pultrusion, filament winding,  RTM and vacuum infusion applications. This is a tough resin, compatible for use with carbon fibre or any other fabric.
€24.44 €24.44 Tax incl. €20.20 Tax excl.

Crystic 15PA High Performance Vinyl Ester Spray Tooling Gelcoat

WGC0015
 (2)
Crystic Gelcoat 15PA(S) is designed for use in the manufacture of high quality, FRP composite tooling. It is a pre-accelerated Spray gelcoat specially formulated from a vinyl ester base resin and is available in a restricted range of colours. The information contained in this leaflet also applies to pigmented versions.
€27.35 €27.35 Tax incl. €22.60 Tax excl.

Crystic 15PA High Performance Vinylester Brush Tooling Gelcoat Green 2606

WGC0015B
 (1)
Crystic Gelcoat 15PA(B) is designed for use in the manufacture of high quality, FRP composite tooling. It is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and is available in a restricted range of colours. The information contained in this leaflet also applies to pigmented versions.
€27.35 €27.35 Tax incl. €22.60 Tax excl.

Crystic 15PA High Performance Vinylester Brush Tooling Gelcoat Black 630

WGC063015
 (1)
Crystic Gelcoat 15PA(B) is designed for use in the manufacture of high quality, FRP composite tooling. It is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and is available in a restricted range of colours. The information contained in this leaflet also applies to pigmented versions.
€27.35 €27.35 Tax incl. €22.60 Tax excl.

Crystic Primecoat Polyester High Build

WGC0001
 (6)
Crystic Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc.
€31.62 €31.62 Tax incl. €26.13 Tax excl.

Crestabond M1 Methacrylate Adhesive

 (4)
Crestabond M1-05 is a toughened, two component acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded...
Product available with different options
€42.23 €42.23 Tax incl. €34.90 Tax excl.

Crestomer 1152 PA Urethane Acrylate Adhesive

WCR1152
Crestomer 1152PA is a two part pre-accelerated, highly thixotropic structural adhesive based on unsaturated urethaneacrylate in styrene monomer. It is used in many structural composite applications and has excellent adhesion to FRP laminates, core materials, wood and some metals. Due to its excellent adhesion to a wide range of materials, 1152PA can also...
€43.20 €43.20 Tax incl. €35.70 Tax excl.

Crystic U904LVK30 RTM & Infusion Orthophthalic Polyester Resin

WRP0904LVK30
Crystic Resin U904LVK30 is a low viscosity pre-accelerated orthophthalic polyester resin developed for use in RTM, RTM light and infusion tecniques. It has been designed for cure with standard MEKP and gives suppressed exotherm characteristics with fast cure. 
€47.49 €47.49 Tax incl. €39.25 Tax excl.

Crestabond Adhesive PP-04

WCRETABONDPP04
Crestabond PP-04 is a structural adhesive designed for bonding substrates of low surface energy such as polypropylene (PP), polyethylene (PE) and other difficult plastic bonding, commonly known as thermoplastic polyolefins (POT).
Out-of-Stock
€52.64 €52.64 Tax incl. €43.50 Tax excl.

Crestafix Poly-Fair® F26R Polyester Fairing Compound for the Marine and Tooling Industry

CrestafixF26EU
Poly-Fair F26 is a water resistant, low-density polyester-based fairing compound. Poly-Fair F26 has good adhesion to cured fiberreinforced polyester and vinylester laminates. Poly-Fair sands easily, gives a hard finish after a full cure, yet is not brittle and has good impact strength. Poly-Fair F26 is supplied as “R” regular version, “S” summer version.
Last items in stock
€57.60 €57.60 Tax incl. €47.60 Tax excl.

Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion

WRP9551
 (1)
CRYSTIC PD 9551 is a low profile polyester resin, designed for use in RTM. It is a mixture of an unsaturated polyester resin and a low profile additive, which phase separate during the curing reaction. The dissimilar thermal expansion/contraction rates of the two components produce micro voids, which compensate for the bulk shrinkage of the unsaturated...
€60.50 €60.50 Tax incl. €50.00 Tax excl.

Crestapol® 1211A Fire Resistant filled urethane acrylate resin

CR1211A
Crestapol® 1211A is a filled, partially accelerated, tough, urethane acrylate resin designed for applications requiring the highest levels of fire & smoke performance. It incorporates a selected grade of Alumina Trihydrate (ATH) which makes it suitable for the production of laminates where excellent fire resistance and low levels of smoke & toxic...
€65.75 €65.75 Tax incl. €54.34 Tax excl.

Crestafix Poly-Fair F24VE Vinylester Fairing Compound for the Marine and Tooling Industry

POLYFAIR F24 VE
Crestafix Poly-Fair F24VE is a vinylester fairing compound for the Marine and Tooling Industry. Poly-Fair F24VE has excellent water and corrosion resistance. It is a light weight, 100% vinylester resin fairing compound and is used below the waterline in the marine industry, or in any environment that requires chemical resistance.
€73.69 €73.69 Tax incl. €60.90 Tax excl.
Product added to wishlist