Tax incl. Tax excl.

Best sellers

Crestapol® 1211A Fire Resistant filled urethane acrylate resin
Resins for composite materials

Crestapol® 1211A Fire Resistant filled urethane acrylate resin

Scott Bader
CR1211
€64.10 €64.10 VAT excl.
Crestapol® 1211A is a filled, partially accelerated, tough, urethane acrylate resin designed for applications requiring the highest levels of fire & smoke performance. It incorporates a selected grade of Alumina Trihydrate (ATH) which makes it suitable for the production of laminates where excellent fire resistance and low levels of smoke & toxic...
View
200 gsm Glass-Epoxy Prepreg Alutex MTP305 V-202T-33%RW, width 1270 mm
Home

200 gsm Glass-Epoxy Prepreg Alutex MTP305 V-202T-33%RW, width 1270 mm

SHD
20501
€49.00 €49.00 VAT excl.
Alutex MTP305 V-202T is a glass prepreg manufactured with a high transparency modified epoxy resin. It is suitable for aesthetic carbon composite parts where high cosmetical requirements are needed. The epoxy resin MTCV305 can be used with carbon or metallic mould with the standard technologies: Hot Press, Wrapping, Autoclave and Vacuum Bag.
View
200 g/m2 carbon fabric/fibre 2x2 Twill 3K with PA fixation
Reinforcement fibres

240 g/m2 Carbon Fabric 2x2 Twill 3K Stabilised with WF1 Polyamide fixation, 100 cm width

FCFP240S
€55.00 €55.00 VAT excl.
Carbon fabric for high performance applications where high strength and low weight is required. Especially recommended for cosmetic applications because this fabric has a one side polyamide fixation, which gives great consistency when being cut.
View
406 gsm 0º/90º Biaxial 50K Saertex® B-C-406 Carbon Fibre Cloth, 127 cm wide
Reinforcement fibres

406 gsm 0º/90º Biaxial 50K Saertex® B-C-406 Carbon Fibre Cloth, 127 cm wide

SAERTEX
TCBX406
€40.15 €40.15 VAT excl.
406 gsm 0º/90º Biaxial 50K Saertex B-C-406 Carbon Fibre Cloth suitable for high performance applications where high strength and low weight are required. Produced with two layers of 200 sqm unidirectional carbon Zoltek Panex 35-13 50K layers oriented at 0° and 90°. Suitable for manufacturing composite parts and tooling using epoxy, urethane-acrylate or...
View
Carbonate calcium
Resin pigments, fillers and additives; solvents and cleaners

Calcium Carbonate (1-2 mm)

WAA0102
€4.00 €4.00 VAT excl.
Calcium carbonate is a mineral filler ideal for reducing the cost of thermosetting resins in casting applications, fillers or putties, etc. Specially used in combination with polyester resins for polymer concrete applications.
View
Carbon-Epoxi MTC275-C650T-HS-12K-37% RW Twill 2 x 2 of 650 g/m2, 1250 mm wide
Prepregs for composites

Carbon-Epoxy Prepreg VTC401-C650T-HS-12K-38% RW twill 2x2, width 1250 mm

SHD
SHD0130-1250
€107.00 €107.00 VAT excl.
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
View
Plain Recycled PET FOAM Divinycell PR80 10 PSC, 10 mm thick
Sandwich cores for composites

Plain Recycled PET FOAM Divinycell PR80 10 PSC, 10 mm thick

DIAB
PET8010PSC
€29.50 €29.50 VAT excl.
Divincyell PR is a thermoplastic sandwich core material manufactured from recycled PET raw material. Good mechanical strength to low weight makes it suitable for goods transport applications and sandwich panelling. Maximum processing temperature is dependent on time, pressure and processing conditions. Therefore users are advised to contact our...
View
PVC Foam CoreLite 80 GS 25 mm
Sandwich cores for composites

PVC Foam CoreLite 80 GS 25 mm

Corelite
CLPVC8025
€69.00 €69.00 VAT excl.
CoreLite® PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.
View
600 g/m2 50K Triaxial Carbon CTXL600, 0°/±45°, width 127 cm
Home

600 g/m2 50K Triaxial Carbon CTXL600, 0°/±45°, width 127 cm

21031
€53.50 €53.50 VAT excl.
600 g/m2 Stitched Triaxial Carbon (0º/-45º/+45º) suitable for pruction of composite parts and tools using epoxy, urethane-acrylate (Crestapol 1250LV) or vinyl ester resins. Carbon yarn type: Zoltek PANEX PX35 T73 50K. 3790 tex (200 g/m2 for one layer at 0° and 2 layers of 200 g/m2 at +-45°). Roll Width: 1270 mm
View

Home

Feedbacks

General rating
4.9 / 5
Based on 950 feedbacks
Orders:
4.9
Products:
4.9
View feedbacks...
Product added to wishlist
WhatsApp
Product added to comparison.