By buying this product you can collect up to
3
points.
Your cart will total 3
points that can be converted into a voucher of
€0.30.
Unidirectional Carbon fabric 24 K and 300 g/m2 is suitable for production of composite parts and tools with epoxy, vinyl ester and urethane-acrylic (Crestapol) resins. Ideal for specific reinforcements in certain directions of the composite part or tool. Supplied covered with a protective and sealing plastic film.
Unidirectional Carbon fabric 24 K and 300 g/m2 is suitable for production of composite parts and tools with epoxy, vinyl ester and urethane-acrylic (Crestapol) resins. Ideal for specific reinforcements in certain directions of the composite part or tool. Supplied covered with a protective and sealing plastic film. Additionally, the fabric yarns are hold together thanks to the application of a thin thermoplastic thread on one side of the fabric.This thread is compatible with all thermosetting resins.
Type of carbon thread: 24 K and 1600 tex, type Tenax STS40F13
Roll Width: 63 cm
Characteristics:
Wire diameter: 7.0 micron
Density [g / cm3]: 1.77
Tensile strength [MPa]: 4000
Tensile modulus [GPa]: 240
Elongation at break [%]: 1.7
Unidirectional Carbon fabric 24 K and 300 g/m2 x 1 linear meter (0.63 m2), supplied rolled in a cardboard box
Unidirectional Carbon fabric 24 K and 300 g/m2 x 5 linear m (3.15 m2), supplied rolled in a cardboard box
Unidirectional Carbon fabric 24 K and 300 g/m2 x 25 linear meters (15.75 m2), supplied rolled in a cardboard box
Cookie preferences
Español
Français
Deutsch
Italiano
Português
