High Chemical Resistance Vinyl Ester Topcoat Brush
By buying this product you can collect up to 3 points. Your cart will total 3 points that can be converted into a voucher of €0.30.
Preaccelerated vinyl ester topcoat with high chemical resistance. Ideal for finishing glass fiber laminates made with polyester or vinyl ester resins in chemical aggressive environments.

Preaccelerated vinyl ester topcoat with high chemical resistance. Ideal for finishing glass fiber laminates made with polyester or vinyl ester resins in chemical aggressive environments. Excellent chemical resistance to hydrocarbons in general and gasoline in particular. This topcoat is ready for use with roller or brush.
Gel time at 25 °C with 2% MEKP catalyst: 12 - 16 minutes.
Heat distortion temperature: HDT > 130 °C
Type of supply
High Chemical Resistance Vinyl Ester Topcoat x 1 kg, with 20 g of MEKP catalyst
High Chemical Resistance Vinyl Ester Topcoat x 5 kg, with 100 g of MEKP catalyst
High Chemical Resistance Vinyl Ester Topcoat x 23 kg, with 0.5 kg of MEKP catalyst
ADR (DANGEROUS GOODS)
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.
* Shippings to Portugal will be always carried by Torrestir