Crystic 65PAX Grey RAL 7047 Brush Isophthalic Polyester Topcoat
By buying this product you can collect up to
2
points.
Your cart will total 2
points that can be converted into a voucher of
€0.20.
Crystic Topcoat 65PAX is a pre-accelerated, isophthalic topcoat. Crystic Topcoat 65PAX is designed for use where a smooth finish is required on the reverse side of a laminate. Crystic Topcoat 65PAX has low styrene emission.
Warning: Returns are not accepted for Gel Coats and Top Coats pigmented according to the RAL chart, as they are specifically made for each order.
Crystic Topcoat 65PAX is a pre-accelerated, isophthalic topcoat. It has been formulated for brush application and is available in a restricted range of colours.
Crystic Topcoat 65PAX is designed for use where a smooth finish is required on the reverse side of a laminate.
Crystic Topcoat 65PAX has low styrene emission. It is not air inhibited, and produces a matt finish.
Crystic Topcoat 65PAX should be allowed to attain workshop temperature (18oC - 20oC) before use. Stir well by hand, or with a low shear mixer to avoid aeration, and then allow to stand to regain thixotropy. Crystic Topcoat 65PAX requires only the addition of catalyst to start the curing reaction. The recommended catalyst is Butanox M50 (or other equivalent catalyst), which should be added at 2% into the topcoat. (Please consult our Technical Service Department if other catalysts are to be used). The catalyst should be thoroughly incorporated into the topcoat, with a low shear mechanical stirrer where possible.
Type of supply
Crystic Topcoat 65PAX Grey RAL 7047 Brush Isophthalic Polyester Topcoat x 1 kg, supplied with 20 g of MEKP catalyst
Crystic Topcoat 65PAX Grey RAL 7047 Brush Isophthalic Polyester Topcoat x 5 kg, supplied with 100 g of MEKP catalyst
Crystic Topcoat 65PAX Grey RAL 7047 Brush Isophthalic Polyester Topcoat x 26.75 kg, supplied with 0.5 kg of MEKP catalyst
Cookie preferences

Español
Français
Deutsch
Italiano
Português