Tax incl. Tax excl.
Colorless Gel coat VI5090 SPRAY

Resolcoat VI5090 Epoxy Compatible Clear Vinylester Gelcoat for Brush

WGV5090-1
0 Item
€33.10

By buying this product you can collect up to 3 points. Your cart will total 3 points that can be converted into a voucher of €0.30.

€33.10 Tax incl. €33.10 Tax excl.

The Resolcoat VI5090 is a high resistance epoxy compatible gelcoat formulated on a vinylester resin base. Its main characteristics are a very high resistance to solvents and chemical agents, which makes it an excellent product for tooling.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

The Resolcoat VI5090 is a high resistance gelcoat formulated on a vinylester resin base. Its main characteristics are a very high resistance to solvents and chemical agents, which makes it an excellent product for tooling, but also its high TG of 105 degrees makes it a product of choice for Pre-preg parts, as Resoltech states. We, Castro Composites, recommend to carry out trials for these type of applications as we do not recommend the use of gelcoats when using prepress. Rather than this, we enthusiastically recommend this gelcoat for tooling produced with both vinylester or epoxy resins.
For tooling, the VI 5090 enables the mould to have a permanent high gloss aspect resisting to many cycles between waxing/polishing. Thanks to its low dilatation module when exposed to temperature and its flexibility, the VI5090 is not prone to cracks and the appearance of mat zones.

The Resolcoat VI 5090 comes in a neutral (transparent) color but can be delivered in any RAL color or with RAL pigments.

In order to spray the VI 5090, it is possible to dilute it with styrene up to 5% and acetone up to 3%. To avoid any risks of porosity, we recommend to catalyze the VI5090 with MEKP (2 to 2,5%). As always when using a product in a new application, it is always recommended to test the system on a small surface of the same characteristics of the main surface to be sprayed or painted with rollers or brushes. 

Gel time at 25 ºC with 2% of MEKP: 25-45 min

Heat distortion temperature: 105 ºC

Type of supply

Resolcoat VI5090 Clear Vinylester Gelcoat Compatible Epoxy x 1 kg, supplied with 20 g of MEKP catalyst

Resolcoat VI5090 Clear Vinylester Gelcoat Compatible Epoxy x 5 kg, supplied with 100 g of MEKP catalyst

Resolcoat VI5090 Clear Vinylester Gelcoat Compatible Epoxy x 25 kg, supplied with 0.5 kg of MEKP catalyst

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Product added to wishlist