Tax incl. Tax excl.
2060/2061 ALU25 Gel coat for moulds

Resolcoat 2060 ALU25 Tooling Epoxy Gelcoat

WGCE2060
1 Items
Last items in stock
€172.72

By buying this product you can collect up to 17 points. Your cart will total 17 points that can be converted into a voucher of €1.70.

€172.72 Tax incl. €172.72 Tax excl.

RESOLCOAT 2060 GC ALU epoxy gelcoat is formulated for the production of composites tooling. It enables to manufacture tooling that will resist many years to the most demanding heating and cooling post-curing cycles of: heating RTM & pre-preg tooling, high output heat forming of thermoplastics or polymer concrete/solid surface injection tools. Maximum Tg: 115 ºC.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

RESOLCOAT 2060 GC ALU epoxy gelcoat is formulated for the production of composites tooling. It enables to manufacture tooling that will resist many years to the most demanding heating and cooling post-curing cycles of: heating RTM & pre-preg tooling, high output heat forming of thermoplastics or polymer concrete/solid surface injection tools.

Its Novolac based formula guarantees the highest mechanical and chemical resistance, notably to styrene. Polyester or Vinylester parts manufactured on the 2060 GC ALU gelcoat will release with high gloss for numerous cycles. Should the gelcoat needed to be repaired, polishing the repaired area will enable to regain a high gloss surface aspect.

This new generation system, optimized with excellent self levelling characteristics and excellent air release, is suitable for the manufacture of large composite tooling. It should be applied by brush or airless.

The recommended application thickness ranges from 500 μm to 900 μm @ 25°C, which it is possible to achieve in one coat on a vertical surface without sag.

Final thermo-mechanical properties will be obtained after a post curing cycle defined according later in this technical data sheet. 

Mixing ratio by weight = 100 : 13.

Gel time ( 300 g at 25 ° C ): 4 hours and 40 minutes with Hardener 2061S.

Demoulding time at 20 °C: After 24 hours at 23 ºC.

Maximum Tg after posturing process: 115 ºC.

Type of supply

Resolcoat GC 2060/2062S (5+0.350)kg 

Resolcoat GC 2060/2066H (5+0.650) kg

1 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Product added to wishlist