By buying this product you can collect up to
5
points.
Your cart will total 5
points that can be converted into a voucher of
€0.50.
Pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. Very low Shore A hardness (approx. 12).
Pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature.
ELASTOSIL® M 4511 is a high-performance mould making compound, which is particularly suitable for the reproduction of models with extensive undercuts. ELASTOSIL® M 4511 is especially suitable for the processing of polyester and polyurethane resins.
If molds for processing epoxy or polyurethane resins are to be made, ELASTOSIL® M 4511 is cured by adding 5 wt % Catalyst T 21.
For molds used to process other reproduction materials such as polyester resins, plaster, concrete, synthetic stone, wax or low-melting alloys, 5 wt % Catalyst T 51 should be used.
Elastosil M 4511 mould making Silicone x 1 kg, supplied with 50 g of T51 catalyst for polyester parts
Elastosil M 4511 mould making Silicone x 5 kg, supplied with 250 g of T-51 catalyst for polyester parts
Elastosil M 4511 mould making Silicone x 25 kg, supplied with 1.25 kg of T-51 catalyst for polyester parts
Elastosil M 4511 mould making Silicone x 1 kg, supplied with 50 g of T-21 catalyst for polyurethane or epoxy parts
Elastosil M 4511 mould making Silicone x 5 kg, supplied with 250 g of T-21 catalyst for polyurethane or epoxy parts
Elastosil M 4511 mould making Silicone x 25 kg, supplied with 1.25 kg of T-21 catalyst for polyurethane or epoxy parts
Cookie preferences
Español
Français
Deutsch
Italiano
Português
