Double Sided Adhesive Tape 1 inch (2.54 cm)

Name: Double Sided Adhesive Tape 1 inch (2.54 cm)
Brand: Castro Composites
SKU: WVC0011
Price: 33.75 EUR
Availability: InStock

Reference WVC0011

In stock 24 Items

€33.75

€40.84 Tax incl. €33.75 Tax excl.

Tax excluded

By buying this product you can collect up to 4 point points. Your cart will total 4 points that can be converted into a voucher of €0.40.

Double sided adhesive tape for holding vacuum spiral tubes, distribution mesh, infusion fittings, etc., during infusion / vacuum processes.

‎

Calculate Shipping Cost

Ratings and comments from our customers

( 0.0 / 5) - 0 feedback(s)

Description
Questions(FAQs)

Double sided adhesive tape for holding vacuum spiral tubes, distribution mesh, infusion fittings, etc., during infusion / vacuum processes.

Type of supply

Double sided adhesive tape 1 inch wide x 1 roll of 33 linear m, supplied in plastic bag

In stock 24 Items

Customers who bought this product also bought:

Fibre Reinforcements

275 g/m2 Glass Fabric Twill 2x2 UTE 275

TVTWILL275

€9.75 €11.80 Tax incl. €9.75 Tax excl.

Twill 2x2 glass fabric ideal for manufacturing composite parts or moulds with any type of thermosetting resin: polyester, vinylester, epoxy, urethane acrylates of Crestapol range, etc. Roll Width : 100 cm.

View

Gel Coats / Top Coats

Crystic 65PA White RAL 9010 Isophthalic Polyester Gelcoat (Brush)

WGC9010B

€16.15 €19.54 Tax incl. €16.15 Tax excl.

Crystic Gelcoat 65PA is a pre-accelerated, isophthalic gelcoat. It has been formulated for brush application, but spray versions are available. Crystic Gelcoat 65PA is available in a wide range of colours and the information contained in its technical data sheet also applies to these pigmented versions.

View

Fibre Reinforcements

1200 g/m2 Unidirectional UD Glass Fabric, 127 cm wide

WTVU1200

€8.90 €10.77 Tax incl. €8.90 Tax excl.

Unidirectional glass fabric of 1200 g/m2 ideal for manufacturing structural laminates with epoxy, urethane acrylate, polyester or vinyl ester resins. Very used in the wind energy and marine industry, but also used in any type of process for producing composite parts or moulds, where high mechanical properties are required. Recommended for infusion and RTM.

View

Tejido de carbono tafetán de 3 K y 160 g/m2

Fibre Reinforcements

160 g/m2 3K Plain Weave Carbon Fabric, width 100 cm

WFC160T

€35.50 €42.96 Tax incl. €35.50 Tax excl.

Carbon fabric of 160 g/m2 for high performance applications where high strength and low weight is required.

View

Semipermanent release agent Zyvax FlexZ 6.0

Release Agents & Sealers

Zyvax FlexZ 6.0 Semipermanent Release Agent

FLEX-Z-6.0

€14.95 €18.09 Tax incl. €14.95 Tax excl.

Zyvax® Flex-Z™ 6.0 Extra Slip Use on difficult-to-release male moulds or as a flange release.Suitable for the manufacture of composite parts on moulds with all kinds of resins: polyester, vinyl ester, urethane-acrylate and epoxy.

View

Vacuum Bagging Materials

FIPO180 Tubular Vacuum Bag 50 microns, 30 cm wide

WFIPO1805030T

€6.30 €7.62 Tax incl. €6.30 Tax excl.

Tubular vacuum bag made of polyamid/polypropylene for infusion and vacuum bagging using any thermosetting resin. Especially developed for prepregs oven curing at a maximun tempreture of 180 ºC.

View

Home

MTI Hose Infusion Vacuum Line

WMTIHOSE

€7.08 €8.57 Tax incl. €7.08 Tax excl.

MTI® is the abbreviation for Membrane Tube Infusion and describes a suction hose sheathed with a microporous membrane for vacuum infusion. The MTI® hose is an air-permeable and resin-blocking line for the evacuation of air. Its ease of use and a considerable simplification of the infusion process makes MTI® hose a great choice.

View

Resins

Resoltech 1050 Infusion Epoxy Resin

WRE1050

€45.00 €54.45 Tax incl. €45.00 Tax excl.

The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing. This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding.

View

Vacuum Bagging Materials

PO160 Tubular Vacuum Bag 70 microns 100 mm wide (63.66 mm diameter)

FIPO16070100T

€6.11 €7.39 Tax incl. €6.11 Tax excl.

Tubular vaccum bag made of copolymer PE CPA PE, green colour, ideal for all types of processes with thermosetting resins: urethane- acrylates, polyester, vinyl ester, epoxy, etc. Ideal for infusion and vacuum compaction processes, developed also for prepregs oven curing at a maximun temperature of 160 °C.

View

Fibre Reinforcements

600 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), 127 cm wide

WTVBX600

€9.68 €11.71 Tax incl. €9.68 Tax excl.

Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

View