Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
Project requirement
Identify the required fire, smoke and toxicity level and the part's end use before defining the laminate.
Industry and construction / Transport · railway · construction
Parts with fire and smoke requirements
When choosing resin for a part with reaction-to-fire requirements, first define the test the project must pass. The choice depends on the combination of resin, reinforcement, thickness, finish and process; the following options support contact moulding, infusion or RTM according to the product.
View selected materials ↓
Before you buy
Three points to guide your choice
Tested system
Check the resin, reinforcement, thickness and gelcoat of the reference system. Changing one layer can change the behaviour of the complete assembly.
Process and curing
Fillers affect flow during infusion. Adapt the reinforcement and validate filling, homogeneity and curing of the part.
What to buy for this project
Selected materials
Compare their purpose and conditions of use.
Check sizes and options on each product page.
ATH-filled urethane acrylate · infusion and RTM
Crestapol® 1211A Fire Resistant filled urethane acrylate resin
Crestapol 1211A for transport and construction parts with fire, smoke and toxicity requirements, manufactured by infusion or RTM.
Before choosing
Use reinforcements suitable for the flow of a filled resin and check the complete resin, reinforcement and finishing system against the project's requirement. Post-curing improves final fire-retardant performance.
ATH-filled polyester · contact moulding, infusion and RTM
Crestafire® P1-3001PA Fire Retardant Hand Laminate Resin
Crestafire P1-3001PA for laminates with fire and smoke requirements in railway, public transport and construction applications.
Before choosing
For the reference system with GCS1001E PA gelcoat, validate the complete laminate: reinforcement, thickness, finish and cure. The fire classification does not transfer to any part. This gelcoat is spray-applied and intended to be painted afterwards.
Crestafire GCS1001E PA: Spray gelcoat for the reference fire and smoke system with P1-3001PA. The complete part and its finish must be validated.
You may also be interested in
All applications →
Resin + vacuum process
Resin infusion
Resins for infusion and injection of composite parts, with options for different processes and service conditions.
11 materials · View application
Glass · carbon · aramid
Fibre-reinforced laminated parts
Epoxy, polyester and vinyl ester resins for making fibre-reinforced parts by hand lay-up or spray-up.
17 materials · View applicationDoes your project have other requirements?
Tell us about the process, materials and working conditions.
