Tax incl. Tax excl.

Best sellers

Dust mask 3M 6200 for gases and carbon particles
Tools and equipment for composites

3M™ 6200 Reusable Half Facepiece Respirator

3M
WUU3M6200
€26.50 €26.50 VAT excl.
3M™ 6200 Reusable Half Facepiece Respirator, Medium, 6200 is an economical, low-maintenance, simple to handle and extremely lightweight. Can also be used with 3M™ Supplied Air Systems for your increased convenience and flexibility. 
Crystic 65PA clear brush Polyester Top coat
Gelcoats and topcoats

Crystic Topcoat 65PAX Clear Brush Isophthalic Polyester Topcoat

Scott Bader
WTC0001
€14.95 €14.95 VAT excl.
Crystic Topcoat 65PAX is a pre-accelerated, isophthalic topcoat. It has been formulated for brush application and is available in a restricted range of colours. Crystic Topcoat 65PAX is designed for use where a smooth finish is required on the reverse side of a laminate. Deflection Temperature Under Load (1.80 MPa): 75 ºC.
View
Resolcoat 7090/7091T black Epoxy Gel Coat
Gelcoats and topcoats

Resolcoat 7090 BLACK / 7091T Epoxy Gelcoat for Tooling & Composite Parts

RESOLTECH
WGCE7090NEGRO
€97.01 €97.01 VAT excl.
RESOLCOAT 7090 Black (Noir) / 7091(T) epoxy system is a high Tg gelcoat specially formulated for the production of tooling and structural composites parts requiring high service temperatures. Maximum Tg after postcuring cycle: 139 ºC.
View
Resoltech 7090 RAL 6029 green Epoxy Gel Coat
Gelcoats and topcoats

RESOLCOAT 7090 / 7091(T) Green RAL 6029 Epoxy Gelcoat for Tooling & Composite Parts

RESOLTECH
WGCE7090V
€97.01 €97.01 VAT excl.
RESOLCOAT 7090 / 7091(T) green RAL 6029 epoxy system is a high Tg gelcoat specially formulated for the production of tooling and structural composites parts requiring high service temperatures.  Maximum Tg after postcuring cycle: 139 ºC.
View
RAL 9016 Crystic GT-900 Isophthalic Gelcoat - SPRAY
Gelcoats and topcoats

RAL 9016 Crystic GT-900 PAX Isophthalic Polyester Topcoat - SPRAY

€19.51 €19.51 VAT excl.
Crystic® GT-900 PAX is a high performance isophthalic polyester topcoat. It is filled, pre-accelerated and formulated for spray application.Crystic® Topcoat GT-900 PAX has been developed to have excellent intrinsic water and weather resistance. It is used for painting the back of polyester parts once demoulded or for repairing a gelcoat surface.
View
Prepeg Carbon-Epoxy VTC401-UD100-T700-40%RW-300P
Carbon fibre epoxy prepregs

100 g/m2 Unidirectional Carbon-Epoxy Prepreg VTC401-UD100-12K-HS-40%RW-300

SHD
T0355
€65.00 €65.00 VAT excl.
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
View
165 g/m2 Plain Kevlar/Carbon Fabric, 120 cm width
Reinforcement fibres

165 g/m2 Plain Kevlar/Carbon Fabric, 120 cm width

21416H-120
€41.00 €41.00 VAT excl.
Aramid (Kevlar®) /Carbon hybrid woven fabrics combine the properties of both materials in each layer, delivering a high strength-to-weight ratio, high drapability, impact resistance, abrasion resistance, dimensional stability, and fatigue resistance.
View
Crystic VE676T AC
Resins for composite materials

Crystic VE 677 PA High Chemical Resistance Epoxy Bisphenol Vinyl Ester Resin

Scott Bader
WRV677PA
€19.10 €19.10 VAT excl.
CRYSTIC VE 677 PA is a vinyl ester resin based on epoxy bisphenol A. It is thixotropic and pre accelerated. CRYSTIC VE 677 PA has excellent chemical resistance to a wide range of substances (acids, alkalies and oxidising agents). Crystic VE 677 PA utilises isophthalic UP resin as an additive in order to achieve favourable handling performance...
View
Acetone Replacement
Resin pigments, fillers and additives; solvents and cleaners

Acetone Replacement

GAL97
€15.00 €15.00 VAT excl.
It is a butyl ester of lactic acid L(+) that is produced by fermentation and replaces acetone. It is a clear, colorless liquid with low volatility, which has a characteristic odor and can be mixed with water and most organic solvents.
View
PO180 Tubular Vacuum Bag of 75 microns 120 cm wide, 180 ° C
Vacuum bagging materials for composites

PO180 Tubular Vacuum Bag of 75 microns 120 cm wide, 180 ° C

Diatex
WVC75120TB
€42.59 €42.59 VAT excl.
PO180 is a polyamide / polypropylene tubular vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
View
1200 g/m2 Quadriaxial glass cloth (0º/+45º/90º/-45º), 127 cm wide
Home

1200 g/m2 Quadriaxial Stitched Glass Fabric (0º/+45º/90º/-45º), 127 cm wide

WTVQX1200
€12.89 €12.89 VAT excl.
Quadriaxial glass fabric of 1200 g/m2 built of four layers of unidirectional fabric oriented at 0°, +45, 90° and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
View
Crystic Orthophthalic Polyester Putty PA 90-82
Adhesives and fillers for composites

Crystic 90-82PA Orthophthalic Polyester Bonding Paste

Scott Bader
WRP9082
€14.60 €14.60 VAT excl.
Crystic BP 90-82PA is pre-accelerated polyester bonding paste. It is a viscous, white and filled compound containing a flexible additive, specifically designed for the assembly and bonding of GRP mouldings. Such applications include panels, inserts, internal frames, ribs, composite constructions and car body components. The use of these bonding pastes...
View
Triaxial weave carbon (0 / -45 / + 45) 450 g / m2 stiched type (sewing).
Reinforcement fibres

450 g/m2 12K Stitched Triaxial Carbon Fabric (0º/-45º/+45º)

WTCTX450BOKA
€59.00 €59.00 VAT excl.
450 g/m2 Stitched Triaxial Carbon fabric (0º/-45º/+45º) suitable for pruction of composite parts and tools using epoxy, urethane-acrylate (Crestapol 1250LV) or vinyl ester resins. Carbon yarn type: 800 tex (147 g/m2 for one layer at 0° and 2 layers of 157 g/m2 at +-45°). Roll Width: 1270 mm
View
Resoltech 8050L/8059 ultra fast epoxi filler
Home

Resoltech 8050L/8059 ultra fast epoxi filler

RESOLTECH
K8050L-400
€75.60 €75.60 VAT excl.
RESOLTECH 8050L / 8059 is a ultra fast curing and easy sanding filler. It is a premium choice to substitute polyesters filler. Due to its very fast curing characteristics it is best to use in cartridges and it is particularly suitable for fast repairs of cracks in mould, finishing of small surface defects, caulking between assembly elements... It is...
View
Divinycell PN80 10 PSC Plain PET FOAM 10 mm, 80 kg/m3
PET foams for sandwich cores

Divinycell PN80 10 PSC Plain PET FOAM 10 mm, 80 kg/m3

DIAB
PET8010PSC-1
€45.65 €45.65 VAT excl.
Divinycell PN is a structurally strong PET sandwich core material perfectly suited in a variety of applications to increase their performance and to decrease their weight. In the wind energy segment, its excellent mechanical properties and good processing characteristics make it highly suitable for both blades and nacelles.
View

Home

Feedbacks

General rating
4.9 / 5
Based on 950 feedbacks
Orders:
4.9
Products:
4.9
View feedbacks...
Product added to wishlist
WhatsApp
Product added to comparison.