Tax incl. Tax excl.
3M Industrial Cleaner Citrus Base

3M™ Industrial Cleaner Citrus Base

LIMP500
8 Items
€32.00
€38.72 Tax incl. €32.00 Tax excl.
Tax excluded

By buying this product you can collect up to 3 point points. Your cart will total 3 points that can be converted into a voucher of €0.30.

3M™ Industrial Cleaner Citrus Base is our remarkable liquid industrial cleaner / degreaser used to help dissolve and remove dirt, grease, tar and many non-curing adhesives. It cleans without streaking and has a fresh citrus scent. In some cases it can be used in place of chlorinated or petroleum-based solvents for degreasing and other industrial applications.

‎

 Calculate Shipping Cost
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

3M™ Industrial Cleaner Citrus Base is our remarkable liquid industrial cleaner / degreaser used to help dissolve and remove dirt, grease, tar and many non-curing adhesives. It cleans without streaking and has a fresh citrus scent. In some cases it can be used in place of chlorinated or petroleum-based solvents for degreasing and other industrial applications.

 

Industrial Cleaner Product Features

 

• No chlorinated or petroleum based solvents
• Cleans gently
• Fresh citrus scent

 

  

Typical Physical Properties

 

 

Typical Uncured Physical Properties

 

Handling/Application Information

  

Compatibility: 3M citrus base cleaner was tested for cleanup effectiveness on the following adhesive/sealant product types:

  • Adhesive/Sealant Type: Typical Effectiveness
  • SBR: Very effective when adhesive is wet; very effective in most cases when adhesive is dry.
  • Neoprene: Very effective in most cases when adhesive is wet or dry.
  • Nitrile: Effective in most cases when adhesive is wet or dry. (Note: There are some nitriles that will not clean up when cured).
  • Asphalt and Asphalt, Reclaim Rubber: Very effective in most cases when adhesives are wet or dry.
  • Acrylic: Effective in most cases when adhesive is wet; relatively ineffective in most cases when adhesive is dry.
  • Epoxies, Urethanes, and Polysulfides: Effective in most cases when adhesive is wet; relatively ineffective when adhesive is dry.
  • Vinyl Resin: Relatively ineffective as a cleaning agent for this base type.
  • Butyl: Effective when adhesive is wet; not very effective when dry.
  • Hot melt: Relatively ineffective on hot melt adhesives.
  • Transfer Tape, misc. Adhesive backed tape: Will aid in the removal of many tapes. Cleaner is slow to dissolve tape residue.

 

Application Techniques

 
  • 3M™ Citrus Base Cleaner may attack some plastics, painted materials and rubbers which is why it should be tested on a small area of any surface being cleaned before using.
  • Directions for Use: Thoroughly coat 3M citrus base cleaner on surfaces or parts being cleaned. Wait a few minutes to allow maximum penetration and loosening action. Then wipe away with a clean, damp rag. Wipe with clean cloth, let air dry. Repeat application when substance to be removed is too thick for maximum penetration.
  • CAUTION! This product should not be used as a hand cleaner and skin contact should be avoided. This product may cause skin irritation on prolonged or repeated contact. Do not rinse into waterways or sewers.
  

The technical information above should be considered representative or typical only and should not be used for special purposes.

 

 

Storage and Shelf Life

  

Store product at 60-80°F (16-27°C) for maximum storage life. Rotate stock on a “first in-first out” basis.
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 24 months from date of manfacture.
 
 
  

Type of Supply

 

3M™ Industrial Cleaner Citrus Base x 1 Spray bottle, 500 ml (387 g)

8 Items
Product added to wishlist