Resoltech 1070 ECO Clear Hand Lay-up Epoxy Resin

37% Bio-sourced epoxy system for room temperature cure & mould release Specially recommended for structural laminates and self leveling top-coats.

Excellent wetting properties on all reinforcements

Enables use of polyester topcoat without inhibition of polyester.

RESOLTECH 1070 ECO is a high end crystal clear epoxy laminating system formulated to produce clear laminates and high gloss clear coatings with good UV stability and high mechanical properties.  
The 1070 ECO system is  a state of the art formulation using two key elements in its bio composition: a partially bio sourced epoxy resin with a plant based reactive diluent, obtaining the highest available bio content without compromising the mechanical characteristics of a structural epoxy system.
The resulting laminates will be absolutely clear on carbon fibres and even transparent if applied on special Hexcel E- glass fabrics with TF970 treatment.  
The viscosity is adapted for squeegee, brush or roller application, and enables to make perfect bubble free & blush surface due to its surface tension properties. The 1070 ECO system has been formulated in order to leave virtually no free amines on the laminate. This even enables the use of any quality polyester finish coat for quick sanding on top of the laminate without inhibition of the polyester.
Although it is not necessary to post-cure this system, like all epoxies a postcure will enable to increase the thermo-mechanical properties of this system.

Colour: Clear Colorless

Mixing weight ratio: 100 / 35 with hardener 1074 ECO.

Gel time 28 minutes to 70 ml of mixture to 4 cm thick and 23 °C.

High glass transition temperature after curing 16 hours at 60 °C: 73.7 ° C.

Type of supply

Resoltech 1070 ECO (1 kg) + ECO 1074 (0.35 kg), gel time 28 minutes

Resoltech 1070 ECO (5 kg) + ECO 1074 (1.75 kg), gel time 28 minutes

Resoltech 1070 ECO (25 kg) + ECO 1074 (8.75 kg), gel time 28 minutes