Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
Process and surface
Decide whether to apply in the mould or on the finished part. On curved or vertical surfaces, check that you can maintain an even film without sagging.
Coatings / Furniture · worktops · art
Clear finishes
Before buying a clear finish, define the substrate and when you will form the surface. A coating is applied to the part; gelcoat is applied in the mould before laminating. Choose the appropriate process, film and exposure conditions.
View selected materials ↓
Before you buy
Three points to guide your choice
Indoor or outdoor
Exposure to light and weather must match the product's instructions.
Preparation and recoating
Seal porous substrates where appropriate and follow the application window between coats.
What to buy for this project
Selected materials
Compare their purpose and conditions of use.
Check sizes and options on each product page.
01
Coatings applied to the part
Finishes for wooden surfaces, worktops and laminates, according to the substrates covered by each system.
Indoor coating
Castropox Clear Cast Clear Epoxy Resin
Clear Cast for coating indoor worktops and art pieces with a clear finish.
Before choosing
Intended for indoor coatings up to 3 mm per layer. On wood or other porous substrates, first apply 1010/1014 water-based primer to prevent air release and allow it to dry before coating. Do not mix components from earlier formulations with version V3.
Resoltech 1010 / 1014 Water-Based Epoxy Primer: Primer for wood and porous substrates, allowed to dry before the finish.
Indoor or outdoor topcoat
Resolcoat 4000 / 4006 Clear Epoxy Topcoat
4000/4006 system for varnishing or applying a clear topcoat to boards, furniture and art pieces.
Before choosing
On wood or other porous substrates, apply 1010/1014 first and let the primer dry. Work in thin layers no thicker than 1 mm, and sand between coats if the previous layer has cured. It may sag on curved or vertical surfaces; for prolonged sunlight exposure, allow for a compatible UV varnish.
Resoltech 1010 / 1014 Water-Based Epoxy Primer: Primer for wood and porous substrates, allowed to dry before the finish.
Epoxy · laminate finish
Resoltech 1070 ECO Clear Hand Lay-up Epoxy Resin
1070 ECO for high-gloss clear finishes on fibre-reinforced laminates.
Before choosing
Apply by brush, roller or spatula as a finishing film. On a cured laminate without peel ply, sand, clean and degrease before coating. Post-curing improves the finish's thermal performance.
Epoxy · worktop finishing coat
Resoltech WWAS / WWB4 Clear Casting Epoxy Resin - New Formula
WWAS/WWB4 for clear finishing coats on worktops and decorative surfaces.
Before choosing
Prepare and seal porous substrates to prevent bubbles. Plan a thin finishing coat, accounting for working temperature and the total volume to be poured.
Flexible clear coating
Resoltech VLS UV Flexible Clear Epoxy Resin
Resoltech VLS UV for enhancing wood and other substrates with a clear, flexible, high-gloss coating.
Before choosing
A flexible finish from 1 to 4 mm. Seal wood and other porous substrates to prevent bubbles; on cured surfaces, prepare adhesion by sanding, cleaning and degreasing.
02
Clear in-mould gelcoat
The surface layer is applied to the mould before the reinforcement.
Epoxy gelcoat · in-mould part surface
Castropox E7UV / Castrodur 331 UV-Resistant Clear Epoxy Gelcoat
Clear epoxy gelcoat for forming the surface of composite parts inside the mould before adding the laminate.
Before choosing
Use the OSKAR’S M700/C release wax specified for this gelcoat. Apply the laminate before the surface layer cures fully, at the intended tack stage. On vertical walls, check that the film remains even.
OSKAR´S M 700/C Release Wax: Release agent specified for applying E7UV inside the mould.
You may also be interested in
All applications →
Wood + resin
River tables
Choose a casting resin that combines wood and transparency, taking the actual volume of your table into account.
1 material · View application
Objects + decoration
Castings and inclusions
Clear resin for decorative objects and inclusions, selected to suit each part's geometry.
4 materials · View application
Clear laminating
Surfboards and watersports boards
Resins for laminating boards with fibre reinforcement while retaining a clear finish over the core.
2 materials · View applicationDoes your project have other requirements?
Tell us about the process, materials and working conditions.
