Resoltech 1070 ECO Clear Hand Lay-up Epoxy Resin
By buying this product you can collect up to 5 points. Your cart will total 5 points that can be converted into a voucher of €0.50.
37% Bio-sourced epoxy system for room temperature cure & mould release Specially recommended for structural laminates and self leveling top-coats.
Excellent wetting properties on all reinforcements
Enables use of polyester topcoat without inhibition of polyester.

37% Bio-sourced epoxy system for room temperature cure & mould release Specially recommended for structural laminates and self leveling top-coats.
Excellent wetting properties on all reinforcements
Enables use of polyester topcoat without inhibition of polyester.
RESOLTECH 1070 ECO is a high end crystal clear epoxy laminating system formulated to produce clear laminates and high gloss clear coatings with good UV stability and high mechanical properties.
The 1070 ECO system is a state of the art formulation using two key elements in its bio composition: a partially bio sourced epoxy resin with a plant based reactive diluent, obtaining the highest available bio content without compromising the mechanical characteristics of a structural epoxy system.
The resulting laminates will be absolutely clear on carbon fibres and even transparent if applied on special Hexcel E- glass fabrics with TF970 treatment.
The viscosity is adapted for squeegee, brush or roller application, and enables to make perfect bubble free & blush surface due to its surface tension properties. The 1070 ECO system has been formulated in order to leave virtually no free amines on the laminate. This even enables the use of any quality polyester finish coat for quick sanding on top of the laminate without inhibition of the polyester.
Although it is not necessary to post-cure this system, like all epoxies a postcure will enable to increase the thermo-mechanical properties of this system.
Mixing weight ratio: 100 / 35 with hardener 1074 ECO.
Gel time 28 minutes to 70 ml of mixture to 4 cm thick and 23 °C.
High glass transition temperature after curing 16 hours at 60 °C: 73.7 ° C.
Type of supply
Resoltech 1070 ECO (1 kg) + ECO 1074 (0.35 kg), gel time 28 minutes
Resoltech 1070 ECO (5 kg) + ECO 1074 (1.75 kg), gel time 28 minutes
Resoltech 1070 ECO (25 kg) + ECO 1074 (8.75 kg), gel time 28 minutes
- Heat resistance
- Between 50 and 75ºC
- Processing time
- Up to 30 min
- UV resistance
- Yes
- Colour
- Colourless transparent
- Flexible
- No
ADR (DANGEROUS GOODS)
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.
* Shippings to Portugal will be always carried by Torrestir
Download Technical Data Sheets