Tax incl. Tax excl.
Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion
Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion
Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion
Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion
Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion
Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion

Crystic PD9551 Low Profile Unsaturated Polyester Resin for RTM & Infusion

WRP9551-5
8 Items
€61.36

By buying this product you can collect up to 6 points. Your cart will total 6 points that can be converted into a voucher of €0.60.

€61.36 Tax incl. €50.71 Tax excl.
Tax included

CRYSTIC PD 9551 is a low profile polyester resin, designed for use in RTM. It is a mixture of an unsaturated polyester resin and a low profile additive, which phase separate during the curing reaction. The dissimilar thermal expansion/contraction rates of the two components produce micro voids, which compensate for the bulk shrinkage of the unsaturated polyester resin.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 1 feedback(s)

CRYSTIC PD 9551 is a low profile polyester resin, designed for use in RTM. It is a mixture of an unsaturated polyester resin and a low profile additive, which phase separate during the curing reaction. The dissimilar thermal expansion/contraction rates of the two components produce micro voids, which compensate for the bulk shrinkage of the unsaturated polyester resin.  

Applications

CRYSTIC PD 9551 was developed primarily for use in RTM processes, but its properties make it equally suitable for use in hot press moulding applications or pultrusion.  CRYSTIC PD 9551 is recommended for the manufacture of mouldings for land transport, and industrial applications. 

It is suitable for the production of tools with excelent surface finish withe glass fibre. It has been recently used with success for the manufacturing of composite tools made of carbon fibre. These tools can also be used for prepregs processes. In house trials must be carried out in this particular case. Please, ask for advice to our technical team.

 
Features & Benefits

The reduced shrinkage characteristics of CRYSTIC PD 9551 enable the manufacture of components with a high quality surface finish and good dimensional stability. 

Get time of 40 minutes at 23ºC with 2.5% of accelerator NL-49P (1% cobalt solution) and 2.5% of LuperoxK1S (MEKP catalyst).

Deflection temperature under load† (1.80MPa) for the unfilled resin: 94ºC

Type of supply

Crystic PD9551PA Low Profile Unsaturated Polyester Resin x 5 kg, supplied with 100 g of MEKP

Crystic PD9551PA Low Profile Unsaturated Polyester Resin x 25 kg, supplied with 0.5 kg of MEKP

Crystic PD9551PA Low Profile Unsaturated Polyester Resin x 200 kg, supplied with 4 kg of MEKP

UV resistance
No
Colour
Yellowish
Flexible
No
Type
ORTHO
Tixo
No
Low shrinkage
Yes
Fire retardant
No
Low styrene emission
No
Lloyd´s Register or Norske Veritas
No
Food contact
No
8 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -  
La uso para fabricación de moldes para curado de piezas fabricadas con prepreg a baja temperatura, pero con la peculiaridad que uso el método de laminación manual y aplicación de vacío, funciona a las mil maravillas. Y el trato como siempre, un 10 para el equipo de CastroComposites.
Product added to wishlist