Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
Hardness and loading
Compare hardness with the impact, compression and tear resistance your part needs. Two materials with the same hardness can behave differently.
Parts and encapsulation / Elastomers · adjustable hardness
Flexible polyurethane parts
When buying a polyurethane elastomer, start with the hardness and deformation the part needs. HPE-V2 allows different combinations, each with its own casting and curing conditions.
View selected materials ↓
Before you buy
Three points to guide your choice
Geometry and thickness
The document gives casting limits for each formulation. Check the data for the specific combination.
Preparation and curing
The data sheet requires dry substrates and covers manual or machine mixing, with degassing and post-curing precautions.
What to buy for this project
Selected materials
Compare their purpose and conditions of use.
Check sizes and options on each product page.
Documented selection
HPE-V2 · Shore A 40–85
HPE-V2 is designed for elastomeric parts, moulds and patterns exposed to mechanical or thermal loads.
Before choosing
Work with a completely dry mould, control moisture and use a release agent compatible with the system. Complex geometries may need vacuum degassing; allow for the post-cure needed to achieve the highest mechanical performance.
You may also be interested in
All applications →
Models · housings · small batches
Polyurethane prototypes and parts
Casting materials for prototypes and rigid parts, distinguishing manual mixing from vacuum casting.
2 materials · View application
Flexible epoxy
Electronic component encapsulation
A flexible epoxy system explicitly intended for sensor encapsulation, subject to validation of the complete assembly.
1 material · View application
Wood + resin
River tables
Choose a casting resin that combines wood and transparency, taking the actual volume of your table into account.
1 material · View applicationDoes your project have other requirements?
Tell us about the process, materials and working conditions.
