Tax incl. Tax excl.

Best sellers

Crystic Filler X401 Grey RAL 7035 polyester putty
Adhesives and fillers for composites

Crystic Filler X401 Grey RAL 7035 Gap Filling Polyester Putty

Scott Bader
WRPM0401
€20.31 €20.31 VAT excl.
CRYSTIC FILLER X 401 is a pre accelerated highly thixotropic polyester compound, specially designed for surface finish at joint line. Application CRYSTIC FILLER X 401 has been developed for filling gaps at the joint line between the halves of wind mill blades.
View
POLYESTER RESIN Crystic R 115 V01
Resins for composite materials

Crystic R115PAV01 Hand Lay-up Flexible Orthophthalic Polyester Resin

Scott Bader
WR0115AF
€16.50 €16.50 VAT excl.
CRYSTIC R115PAV01 is a flexible, pre-accelerated, orthophtalic unsaturated polyester resin that can be used by hand lay up or by spray application for the production of most glass reinforced laminates. This resin can also be used for casting applications.
View
Buzo de trabajo Tyvek XL
Tools and equipment for composites

3M™ 4540+ Protective Coverall

3M
3M4540XL
€11.05 €11.05 VAT excl.
The 3M 4540+ is a highly versatile protective coverall which is mostly made from a unique microporous PE laminate, designed to be softer and drape better over the body. It is designed to offer an excellent barrier to particles and limited liquid splash but it also features a breathable SMMMS back panel.Type 5/6
View
Crystic 15PA Vinyl Ester brush Tooling Gel Coat
Gelcoats and topcoats

Crystic 15PA High Performance Vinylester Brush Tooling Gelcoat Black 630

Scott Bader
WGC063015
€26.95 €26.95 VAT excl.
Crystic Gelcoat 15PA(B) is designed for use in the manufacture of high quality, FRP composite tooling. It is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and is available in a restricted range of colours. The information contained in this leaflet also applies to pigmented versions.
View
Resoltech 1070 ECO
Resins for composite materials

Resoltech 1070 ECO Clear Hand Lay-up Epoxy Resin

RESOLTECH
WRE1070ECO
€60.82 €60.82 VAT excl.
37% Bio-sourced epoxy system for room temperature cure & mould release Specially recommended for structural laminates and self leveling top-coats. Excellent wetting properties on all reinforcements Enables use of polyester topcoat without inhibition of polyester.
View
Dye Translucent, Concentrated Red
Resin pigments, fillers and additives; solvents and cleaners

Translucent Concentrated Red Dye for Clear Epoxy Resins and Varnishes

DTH6411D
€4.50 €4.50 VAT excl.
Dye concentrate for coloring varnishes and resins. Suitable for outdoors (as long as the binder that we add to be suitable for exterior). Add between 1% and 5%. Valid for products, the solvent and the water.
View
Infusion Spiral Plug Eco 12 mm
Vacuum bagging materials for composites

Infusion Spiral Plug Eco 12 mm

Diatex
ACIGSPI12-14
€1.20 €1.20 VAT excl.
Specific connectors for vacuum or resin which can be clipped directly onto adapted spiral tubes. In the upper part, their internal conical shapes allow an easy insertion and a good tightening to facilitate the installation of the consumables.
View
Hybrid carbon / Innegra tissue of 152 g / m2
Reinforcement fibres

152 g/m2 Carbon / Innegra™S fibre, 100 cm wide

WFC657
€38.00 €38.00 VAT excl.
High strength hybrid woven carbon fiber/Innegra ™ S tissue, S type 30tpm S, high impact resistance (polypropylene fiber of high resistance). Ideal for the manufacture of high impact resistance urethane-acrylate (Crestapol 1250LV), epoxy or vinyl ester resins.
View
Carbon Woven Imitation black twill 200 g / m2
Reinforcement fibres

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide

20014
€19.90 €19.90 VAT excl.
High tenacity polyester fabric for manufacturing composite parts of imitation carbon weave. Diolen can be used with most resin systems including polyester, vinyl ester, urethane-acrylate (Crestapol 1250LV) and epoxy. Diolen is a polyester based fibre reasonably close in performance to kevlar but cheaper.
View
Pyrogenic Silica N20ST (thixotropic agent 003)
Resin pigments, fillers and additives; solvents and cleaners

Pyrogenic Silica HDK® N20ST, Thixotropic Agent

30710
€5.60 €5.60 VAT excl.
Thickening agent for resins that increases their thixotropy and improves sag resistance, making application on vertical surfaces easier. It is an amorphous, synthetic and hydrophilic silica produced by flame hydrolysis.
View
Methyl ethyl ketone
Resin pigments, fillers and additives; solvents and cleaners

Methyl ethyl ketone Thinner

WAA0014
€10.00 €10.00 VAT excl.
Solvent for cleaning rollers, brushes, spatulas, etc. when working with epoxy resins.It is also used as a solvent for certain resins & gelcoats, especially epoxies and high gloss finishing polyester top coats for plugs, like Crystic Glosscoat.
View
800 g/m2 Biaxial glass cloth (+45°/-45°)
Reinforcement fibres

800 gsm (+45°/-45°) Biaxial Glass Fabric, 127 cm

WTVBX800
€7.65 €7.65 VAT excl.
Biaxial glass fabric of 800 /m2 built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
View

Home

Feedbacks

General rating
4.9 / 5
Based on 950 feedbacks
Orders:
4.9
Products:
4.9
View feedbacks...
Product added to wishlist
WhatsApp
Product added to comparison.