Tax incl. Tax excl.

Best sellers

165 g/m2 Plain Kevlar/Carbon Fabric, 120 cm width
Out-of-Stock
Reinforcement fibres

165 g/m2 Plain Kevlar/Carbon Fabric, 120 cm width

21356T/120
€41.00 €41.00 VAT excl.
Aramid (Kevlar®) /Carbon hybrid woven fabrics combine the properties of both materials in each layer, delivering a high strength-to-weight ratio, high drapability, impact resistance, abrasion resistance, dimensional stability, and fatigue resistance.
View
610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide
Out-of-Stock
Home

610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide

SAERTEX
TVBX610
€7.90 €7.90 VAT excl.
Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy. Widely used for processes where a very good mechanical strength combined with...
View
Crystic 253PA epoxy compatible white spray Polyester Gel Coat
Out-of-Stock
Gelcoats and topcoats

Crystic 253PA Epoxy Compatible White Spray Polyester Gel Coat

Scott Bader
WGC253WHITE
€25.50 €25.50 VAT excl.
Crystic Gelcoat 253PA is a thixotropic, pre-accelerated, isophthalic gelcoat designed as an in-mould gelcoat with excellent adhesion to epoxy resins without the need for a tie-coat. Formulated for spray application. The use of Resoltech 1050 epoxy resin is recommended. Crystic Gelcoat 253PA is designed for use with wet lay and vacuum injected epoxy systems.
View
Innegra fabric 200 g / m2
Out-of-Stock
Reinforcement fibres

200 g/m2 Plain Innegra Fabric, 127 cm wide

Innegra200127
€34.29 €34.29 VAT excl.
Innegra Fabric ™ S, type S 30tpm S, high impact resistance (polypropylene fibre high strength). Ideal for manufacturing parts with high impact resistance acrylic urethane resins (Crestapol 1260 and 1261), epoxy resins or vinyl ester.
View
Triaxial glass fabric (0/+45/-45º) de 750 g/m2
Out-of-Stock
Reinforcement fibres

609 g/m2 Triaxial Stitched Glass Fabric (0º/+45º/-45º), 127 cm wide

SAERTEX
33796
€7.50 €7.50 VAT excl.
Triaxial glass fabric of 609 g/m2 built of three layers of unidirectional fabric oriented at 0º, +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
View
E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm
Out-of-Stock
Home

E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm

SHD
SHD2465-300P
€95.59 €95.59 VAT excl.
MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.
View
Flexible epoxy adhesive Resoltech 3350HP / 3358HP
Out-of-Stock
Adhesives and fillers for composites

Resoltech 3350 ECO / 3358T ECO High Tenacity Epoxy Adhesive

RESOLTECH
WRE3350ECO
€93.50 €93.50 VAT excl.
Structural epoxy adhesive bio-based and high toughness, with thixotropic behaviour allowing vertical application up to 10 mm without sagging. Ideal for bonding materials with different coefficients of thermal expansion. Excellent adhesion on PVC, PET, balsa, composites, steel, aluminium, concrete and wood. Usable even at <10 °C and in humid...
View
MTC510-UD300-HS-33%RW Unidirectional Carbon-Epoxy Prepreg of 300 g/m2 (24K), 300 mm wide
Prepregs for composites

300 gsm Unidirectional Carbon-Epoxy Prepreg MTC510-UD300-HS-50K-33%RW, 300 mm wide

SHD
SHD3023-300P
€68.15 €68.15 VAT excl.
MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.
View
PR700 cast polyurethane contratipo
Out-of-Stock
Casting polyurethanes

PR700 Polyurethane Resin for Casting (ABS Alternative)

WPU7000
€99.00 €99.00 VAT excl.
Polyurethane resin vacuum casting with high thermal resistance (HDT 130 ° C). Easy to cast even without vacuum. PR700 is an excellent alternative to ABS thermoplastics. Mercury free product suitable with European directive: 2011/65/EC, 2002/96/EC, 2000/53/EC and 2000/11/EC.
View
Carbon Fibre Plain Weave 120 g/m2 SIGRATEX KDL 8020
Out-of-Stock
Reinforcement fibres

120 g/m2 1K Carbon Fibre Plain Weave SIGRATEX KDL 8020

TC0120K1100
€89.00 €89.00 VAT excl.
Carbon fabric for high performance applications where good strength and low weight are required. Especially recommended for cosmetic applications thanks to the 1K carbon yarn used. Compatible with all type of thermosetting resins such us polyester, urethane-acrylate, vinyl ester and epoxy. Suitable for hand lay-up, infusion or RTM (Injection).
View
Crestabond adhesive PP-04
Out-of-Stock
Adhesives and fillers for composites

Crestabond Adhesive PP-04

Scott Bader
WCRETABONDPP04
€28.65 €28.65 VAT excl.
Crestabond PP-04 is a structural adhesive designed for bonding substrates of low surface energy such as polypropylene (PP), polyethylene (PE) and other difficult plastic bonding, commonly known as thermoplastic polyolefins (POT).
View
Polyester resin Crystic 198
Out-of-Stock
Resins for composite materials

Crystic 198 Heat and Chemical Resistant Polyester Resin

Scott Bader
WRP0198
€11.00 €11.00 VAT excl.
Crystic Resin 198 is a medium viscosity orthophthalic polyester resin with good heat and chemical resistant properties. Developed for use in the chemical industry - tanks, pipes , fumestacks etc where heat and chemical resistance are both required but can also be used in industrial, transportation and building and construction applications.
View
Poly-Fair F24VE Vinylester Fairing Compound for the Marine and Tooling Industry
Out-of-Stock
Adhesives and fillers for composites

Crestafix Poly-Fair F24VE Vinylester Fairing Compound for the Marine and Tooling Industry

Scott Bader
POLYFAIR F24 VE
€80.00 €80.00 VAT excl.
Crestafix Poly-Fair F24VE is a vinylester fairing compound for the Marine and Tooling Industry. Poly-Fair F24VE has excellent water and corrosion resistance. It is a light weight, 100% vinylester resin fairing compound and is used below the waterline in the marine industry, or in any environment that requires chemical resistance.
View
White Polyester Gel Coat Crystic LS 97 PA GUN
Out-of-Stock
Gelcoats and topcoats

Crystic LS97PA Low Styrene Content White RAL 9010 Spray Polyester Gelcoat

Scott Bader
WGC9010P
€18.91 €18.91 VAT excl.
Crystic Gelcoat LS 97PA is a high performance low styrene content isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. This product is available in a wide range of colours and the information contained in its datasheet also applies to pigmented versions.  
View
PVC Foam for Infusion Divinycell H80 10 Q300 scrim + drilled, 10 MM
Out-of-Stock
Sandwich cores for composites

PVC Foam for Infusion Divinycell H80 10 Q300 scrim + drilled, 10 MM

DIAB
WNPVC08010
€49.99 €49.99 VAT excl.
Divinycell H80 10 300 is a 80 kg/m3 density PVC foam ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Contour scrim finish: Sheets are knife-cut...
View
Carbon-Epoxi MTC275-C650T-HS-12K-37% RW Twill 2 x 2 of 650 g/m2, 1250 mm wide
Out-of-Stock
Prepregs for composites

Carbon-Epoxy MTC275-C650T-HS-12K-36% RW Twill 2 x 2 of 650 g/m2, width 1250 mm

SHD
MTC2756501237
€100.00 €100.00 VAT excl.
Carbon-Epoxy prepreg MTC275 of 650 g/m2 is designed to give excellent clarity and surface finish out of autoclave. MTC275 can be supplied on a variety of fabrics and in UD format. To be combined with the surface prepreg MTM275-C245T-HQ-HS-3K-42%RW.
View
ESMALTPOLY 275 2C white RAL 9010
Out-of-Stock
Paints and varnishes for composites

Esmaltpoly 275 2K White RAL 9010 Acrylic Enamel

WPPP0501
€32.00 €32.00 VAT excl.
Polyurethane acrylic enamel, catalyzed with pure aliphatic isocyanate for maximum UV yellowing prevention. It is used as a finishing layer for elements exposed to agressive industrial atmospheres, marine environment, splashing oils, acids and alkalis.
View
G3 Premium Abrasive Compound x 1 kg
Out-of-Stock
Finishing and polishing products for composites

G3 Premium Abrasive Compound x 1 kg

3001-7022
€36.50 €36.50 VAT excl.
G3 Premium Abrasive Compound is the only compound needed to permanently remove P1500 or finer sanding marks from all modern paint systems, while leaving a swirl free, high gloss finish with reduced product consumption.
View

Home

Feedbacks

General rating
4.9 / 5
Based on 950 feedbacks
Orders:
4.9
Products:
4.9
View feedbacks...
Product added to wishlist
WhatsApp
Product added to comparison.