Tax incl. Tax excl.

Best sellers

Resolcoat 3010T/3014T
Out-of-Stock
Primers for composites, moulds and substrates

Resolcoat 3010T/3014T Epoxy High Build Surfacer

RESOLTECH
WRE3010
€66.23 €66.23 VAT excl.
RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats.
View
CORE CORK NL20 5 mm
Out-of-Stock
Sandwich cores for composites

CORE CORK NL20 1000 x 1000 x 5 mm

WNL2005
€22.90 €22.90 VAT excl.
CORECORK is a natural and sustainable core material, compatible with existing sandwich core applications offering excellent FST (fire, smoke and toxicity) properties with good mechanical and processing characteristics. Very good impact resistance.
View
Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38% RW Twill 416 g/m2
Out-of-Stock
Prepregs for composites

Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38%RW Twill 2x2 of 416 g/m2

SHD
WMTC275-C416T
€113.85 €113.85 VAT excl.
MTC275 Prepreg is designed to give excellent clarity and surface finish out of autoclave. MTC275 can be supplied on a variety of fabrics and in UD format. To be combined with the surface prepreg MTM275-C245T-HQ-HS-3K-42%RW. Type of carbon fiber used in fabric production: 6K, High Strength.
View
Resoltech 2040G/2045G
Out-of-Stock
Adhesives and fillers for composites

Resoltech 2040G/2045G Structural Adhesive Epoxy for wood bonding & Structural Fillet...

RESOLTECH
WRE2040
€56.50 €56.50 VAT excl.
The RESOLTECH 2040G is a structural adhesive paste specifically formulated for fillet joints on wood. It is also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to its cohesion and high adhesion properties.
View
Twill weave carbon 3K 2 x 2 and 200 g / m2 with epoxy sizing
Out-of-Stock
Pigments and dyes for resins

200 g/m2 2x2 Twill 3K Carbon Fabric Stabilised with Polyamide fixation, 127 cm width

TCS200HP/127
€49.95 €49.95 VAT excl.
Carbon fabric for high performance applications where high strength and low weight are required. Especially recommended for cosmetic applications. Type of yarn: GRAFIL TR30S.3K ( 3000 filaments per strand of yarn). Compatible with all type of thermosetting resins such us polyester, urethane-acrylate, vinyl ester and epoxy. Suitable for hand lay-up,...
View
White Gel Coat Crystic 65 PA BRUSH
Out-of-Stock
Gelcoats and topcoats

Crystic 65PA White RAL 9010 Isophthalic Polyester Gelcoat (Brush)

Scott Bader
WGC9010B
€16.15 €16.15 VAT excl.
Crystic Gelcoat 65PA is a pre-accelerated, isophthalic gelcoat. It has been formulated for brush application, but spray versions are available. Crystic Gelcoat 65PA is available in a wide range of colours and the information contained in its technical data sheet also applies to these pigmented versions. 
View
PVC Foam Divinycell H80 20 mm GSWC30 GPC1 for infusion
Out-of-Stock
Sandwich cores for composites

PVC Foam Divinycell H80 20 Q100 for infusion, 20 mm thickness

DIAB
WNPVC8020
€71.99 €71.99 VAT excl.
Divinycell H80 20 Q100 is a grid scored material in two directions, which makes it formable and flexible for use in curved molds or applications.The sheet has U-shaped cuts in length and width direction of the sheet almost all the way through the core. 
View
Elastosil M 4600 A/B
Out-of-Stock
Mould-making silicones

Elastosil M 4600 A/B Addition-Curing Translucent Silicone Rubber for Moulds Shore A 20

€65.00 €65.00 VAT excl.
Elastosil M 4600 A/B is a pourable, addition-curing, two-component transparent silicone rubber for flexible moulds that vulcanizes at room temperature. Excellent resistance to polyester casting resins, epoxy or polyurethane. Shore A 20 hardness.
View
Polyester resin Crystic U 904 LVK for injection and infusion
Out-of-Stock
Resins for composite materials

Crystic U904LVK30 RTM & Infusion Orthophthalic Polyester Resin

Scott Bader
WRP0904
€49.00 €49.00 VAT excl.
Crystic Resin U904LVK30 is a low viscosity pre-accelerated orthophthalic polyester resin developed for use in RTM, RTM light and infusion tecniques. It has been designed for cure with standard MEKP and gives suppressed exotherm characteristics with fast cure. 
View
Unidirectional Carbon fabric 24 K and 300 g / m2
Out-of-Stock
Reinforcement fibres

Unidirectional Carbon fabric 24 K and 300 g/m2, width 60 cm

WTCU300UQ
€25.00 €25.00 VAT excl.
Unidirectional Carbon fabric 24 K and 300 g/m2 is suitable for production of composite parts and tools with epoxy, vinyl ester and urethane-acrylic (Crestapol) resins. Ideal for specific reinforcements in certain directions of the composite part or tool. Supplied covered with a protective and sealing plastic film.
View
300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 945 mm wide
Out-of-Stock
Reinforcement fibres

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 945 mm wide

SAERTEX
TCBX304-945
€25.00 €25.00 VAT excl.
304 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 149 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...
View
Porlarshine polishing paste M35
Out-of-Stock
Mould and model preparation

Mirka Porlarshine 35 Coarse Polishing Compound

WUU7992810111
€29.45 €29.45 VAT excl.
Polarshine 35 is a coarse polishing compound developed for demanding Industrial and Marine applications. Polarshine 35 is suitable for materials such as gel coats, high gloss lacquers and composites. This product has a faster and more efficient compound and produces a high surface gloss. By using Polarshine 35 you are able to minimize the sanding steps.
View

Home

Feedbacks

General rating
4.9 / 5
Based on 950 feedbacks
Orders:
4.9
Products:
4.9
View feedbacks...
Product added to wishlist
WhatsApp
Product added to comparison.