300 sqm 24K Biaxial Carbon Fabric +45/-45º, 127 cm wide

300 gsm +45o/-45 o 24K Biaxial Carbon is a biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 gsm layers of unidirectional fabric, oriented at +45° and -45°. Suitable for manufacturing of composite parts and tools with epoxy, urethane-acrylate or vinyl ester resins by hand lay-up, infusion or RTM.
It is a multiaxial carbon reinforcement (Non Crimp Fabric or NCF) developed using the most advanced technology and tow spreading process for achieving flatter laminates with a better surface finish (aesthetics)
300 gsm +45o/-45 o 24K Biaxial Carbon is made using ZOLTEK™ PX35 carbon fibre yarns.
The carbon fibre spreading process enables the manufacture of lightweight plies combined using a tricot stitch.

•    Yarn Type: 24K (24,000 filaments per strand of yarn). ZOLTEK™ PX35 with a Tensile Strength of 4137 MPa and a Tensile Modulus of 242 GPa.
•    Assembly: Stitching Tricot Polyester
•    Roll width: 127 cm.
•    Fabric manufacturer: Metyx

Type of supply

300 gsm +45o/-45 o 24K Biaxial Carbon x 1,27 m2, supplied rolled in cardboard box
300 gsm +45o/-45 o 24K Biaxial Carbon x 6,35 m2, supplied rolled in cardboard box
300 gsm +45o/-45 o 24K Biaxial Carbon x 31,75 m2, supplied rolled in cardboard box
300 gsm +45o/-45 o 24K Biaxial Carbon x 63,5 m2, supplied rolled in cardboard box
300 gsm +45o/-45 o 24K Biaxial Carbon x 127 m2, supplied rolled in cardboard box