By buying this product you can collect up to
5
points.
Your cart will total 5
points that can be converted into a voucher of
€0.50.
The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing.
This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding.
Low-viscosity epoxy resin for the manufacture of high-performance composite parts with reinforcing fibers (glass, carbon, or Kevlar). Ideal for the manufacture of large structural parts by hand lay-up, infusion, and injection molding in sectors such as marine, wind energy, etc. It can also be used for casting and for filament winding applications.
6 hardeners available for a gel time between 10 min and 14 hours.
Mix ratio by weight: 100 : 35
Maximum glass transition temperature: 55 - 78 ºC depending on the hardener.
Color: Transparent colorless
To obtain semi-flexible parts, it is possible to combine RESOLTECH 1050 resin and RESOLTECH 1600 resin. More information here.
IMPORTANT, the two components must be mixed in the exact ratio.
Mix very thoroughly in a clean container, scraping the sides and bottom properly, then transfer to another clean container where mixing should continue. This is done because, even if the products appear to be well mixed, unmixed material may remain on the walls and at the bottom of the container. This can cause the resin not to gel properly in certain areas, leading to a poor result.
Resoltech 1050/1059S x (1+0.35) kg, gel time of 10 minutes for 70 mL at 23 ºC
Resoltech 1050/1059S x (5+1.75) kg, gel time of 10 minutes for 70 mL at 23 ºC
Resoltech 1050/1059S x (25+8.75) kg, gel time of 10 minutes for 70 mL at 23 ºC
Resoltech 1050/1058S x (1+0,35) kg, gel time of 26 minutes for 70 mL at 23 ºC
Resoltech 1050/1058S x (5+1.75) kg, gel time of 26 minutes for 70 mL at 23 ºC
Resoltech 1050/1058S x (25+8,75) kg, gel time of 26 minutes for 70 mL at 23 ºC
Resoltech 1050/1056S x (1+0.35) kg, gel time of 58 min for 70 mL at 23 ºC
Resoltech 1050/1056S x (5+1.75) kg, gel time of 58 min for 70 mL at 23 ºC
Resoltech 1050/1056S x (25+8.75) kg, gel time of 58 min for 70 mL at 23 ºC
Resoltech 1050/1055S x (1+0.35) kg, gel time of 2 hours and 38 min for 70 mL at 23 ºC
Resoltech 1050/1055S x (5+1.75) kg, gel time of 2 hours and 38 min for 70 mL at 23 ºC
Resoltech 1050/1055S x (25+8.75) kg, gel time of 2 hours and 38 min for 70 mL at 23 ºC
Resoltech 1050/1054S x (1+0.35) kg, gel time of 5 hours for 70 mL at 23 ºC
Resoltech 1050/1054S x (5+1.75) kg, gel time of 5 hours for 70 mL at 23 ºC
Resoltech 1050/1054S x (25+8.75) kg, gel time of 5 hours for 70 mL at 23 ºC
Resoltech 1050/1053S x (1 + 0,35) kg, gel time of 14 hours for 70 mL at 23 ºC
Resoltech 1050/1053S x (5 + 1,75) kg, gel time of 14 hours for 70 mL at 23 ºC
Resoltech 1050/1053S x (25 + 8,75) kg, gel time of 14 hours for 70 mL at 23 ºC
0/1053S infusion epoxy resin x (25 + 8.75) kg, gel time of 14 hours for 70 g at 23 °C
You might also like
Cookie preferences
Español
Français
Deutsch
Italiano
Português
