Elastosil M 4601 A/B Addition-Curing Mould Making Silicone Shore A 28
By buying this product you can collect up to 5 points. Your cart will total 5 points that can be converted into a voucher of €0.50.
Elastosil M 4601 A/B is a pourable, addition-curing, two-component silicone rubber for flexible moulds that vulcanizes at room temperature. Shore A hardness 28.
Pourable, addition-curing, FOOD GRADE two-component silicone rubber that vulcanizes at room temperature. Cures without undergoing dimensional shrinkage.
- Very Good Flow Low.
- Shore A Hardness (approx 28).
- Fast non-shrink cure which can be accelerated considerably by the application of heat.
- Excellent long-term stability of the mechanical properties of the cured rubber.
- High tear strength and elongtion at break.
- Outstanding resistance to casting resins.
Mixing ratio by weight: 9:1
Gel time at 23 °C: 90 minutes.
Elastosil M 4601 A/B is suitable for casting of resins and all other common reproduction materials, particularly if absolutely accurate copies of models with pronounced undercuts are required.
Type of supply
Elastosil M 4601 A/B Addition-Curing Mould Making Silicone x 1 kg A + B (0.9kg A + 0.1 kg B), supplied with hardener
Elastosil M 4601 A/B Addition-Curing Mould Making Silicone x 5 kg A + B (4.5 kg A + 0,5 kg B), supplied with hardener
Elastosil M 4601 A/B Addition-Curing Mould Making Silicone x 30 kg A + B (27kg A + 3 kg B), supplied with hardener
- Food contact