New products

Showing 1-22 of 22 item(s)

Balsa Wood D150 GS (grid scored) 38,1 mm (1,5") thick

MB38.1

Balsa is a high quality organic core material made from end grain balsa wood. The end grain, micro honeycomb structure offers exceptional shear and compressive strength. Sheet Density (ASTM C 271): 155 kg/m3.

Out-of-Stock

€67.50 €81.68 Tax incl. €67.50 Tax excl.

View

ISO VG 68 mineral oil x 1 litre

ISO68

Paraffinic-based ISO VG 68 mineral oil suitable for lubrication, operation and sealing of lubricated rotary vane vacuum pumps.

€36.00 €43.56 Tax incl. €36.00 Tax excl.

Spike de-aerating roller Ø 115 mm, Width 240 mm

08075

Spike roller for removing bubbles caused by trapped air in epoxy resins applied to floors. Highly recommended for self-leveling epoxy systems. Diameter: 115 mm Width: 24 cm Spikes: 30 mm length Boxes of 4 units

€36.32 €43.95 Tax incl. €36.32 Tax excl.

Tubular Vacuum Bag 465B 165 ºC-70 microns (SPOT)

High-strength, high-elongation vacuum bag, ideal for use with medium-temperature epoxy prepregs and for the production of large components such as marine and wind energy structures, especially in combination with prepreg systems and infusion processes. This is a bag produced for the manufacture of large wind turbine blades and, being tubular, it is cut...

€99.00 €119.79 Tax incl. €99.00 Tax excl.

View

LSM7000 Vacuum Bag Sealant Tape (210 °C), width 25 mm

MESM7000-25

Sealant tape for vacuum bag with heat resistance up to 210 °C. Polyvalent and economic sealant tape recommended for high temperature cures up to 210°C (autoclave cycles). Economic and ideal for use on composite or metallic tools Easy to release from the tools once the mould has cooled down to room temperature. Rolls of 25 mm x 3 mm x 12.5 linear...

€19.00 €22.99 Tax incl. €19.00 Tax excl.

View

Divinycell PN 115 PFC ODC 45 mm PET Foam, 115 kg/m3 / perforated and One-directional cut

Divinycell PN 115 PFC ODC 35 mm PET Foam, 115 kg/m3 / perforated and One-directional cut

PETPN11535SOMOZ

DIAB

Divinycell PN is a structural thermoplastic core material perfectly suited in a variety of sandwich applications to increase performance and reduce weight. Divinycell PN is used in industrial, transportation, marine and wind applications. It is easy to machine and has good dimensional stability at elevated temperatures. It is suitable for a variety of...

€399.00 €482.79 Tax incl. €399.00 Tax excl.

View

Online only
New

Infusion PVC foam Divinycell H80 15 mm PFC ODC / perforated and one-directional cuts

PVCH8015SOMOZ

DIAB

PVC foam with a density of 80 kg/m³, ideal for infusion processes with thermoset resins: urethane-acrylics, polyester, vinylester, epoxy, etc.Surplus production of wind turbine blades.The PFC ODC presentation consists of scrim sheets (with glass mesh on the back), with through holes every 2 cm and deep longitudinal cuts in one direction, spaced 3 cm...

€300.00 €363.00 Tax incl. €300.00 Tax excl.

View

Divinycell PET P60 GST 30 GPC1 Fire Retardant Foam for Infusion, 8 mm thickness

Divinycell PET PR80 8 Q100 Fire Retardant Foam for Infusion, 8 mm thickness

PR808Q100

DIAB

Divinycell PR80 is a recyclable thermoplastic PET foam for sandwich cores, made with up to 45% post-consumer PET and additional post-industrial recycled PET. In addition to good mechanical properties in compression and shear, it offers low resin uptake, good thermal insulation properties and a closed-cell structure that contributes to low water...

Product available with different options

€1,034.50 €1,251.75 Tax incl. €1,034.50 Tax excl.

View

Online only
New

INFUSION PVC FOAM Divinycell H80 20 mm PFC ODC / perforated and one-directional cuts

PVCH8020SOMOZ

DIAB

€330.00 €399.30 Tax incl. €330.00 Tax excl.

View

Online only
New

INFUSION PVC FOAM Divinycell H80 45 mm PFC ODC / perforated and one-directional cuts

PVCH8045SOMOZ

DIAB

€230.63 €279.06 Tax incl. €230.63 Tax excl.

View

Online only
New

INFUSION PVC FOAM Divinycell H80 35 mm PFC ODC / perforated and one-directional cuts

PVCH8035SOMOZ

DIAB

€750.00 €907.50 Tax incl. €750.00 Tax excl.

View

Crestamould Essentials 4005PA – Resin for mould manufacture

Low-viscosity, low-shrink resin for mould manufacture, suitable for hand lay-up and high dimensional accuracy. Supplied with MEKP catalyst in adapted pack sizes, it must always be used according to the dosage recommended in the technical data sheet.

€18.00 €21.78 Tax incl. €18.00 Tax excl.

View

Triaxial glass fabric (0/+45/-45º) de 750 g/m2

1200 g/m2 Triaxial E Glass Fabric (0º/+45º/-45º), 127 cm wide

WTVTX1200

Triaxial glass fabric of 1200 g/m2 built of three layers of unidirectional fabric oriented at 0º, +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.

Product available with different options

€14.50 €17.55 Tax incl. €14.50 Tax excl.

View

Sunoco QS5 Synthetic Oil x 1 l

580146

Synthetic oil for the QS5 vacuum pump, formulated with synthetic base oil and additives. Suitable for vacuum pump lubrication, with a viscosity of 68 cSt at 40 ºC, 10.9 cSt at 100 ºC, and a flash point above 200 ºC.

€35.00 €42.35 Tax incl. €35.00 Tax excl.

Aceite Sintético SUPERLUBE ISO-46 x 1 litro

130320

Synthetic oil for our Griñó-Rotamik vacuum pumps with a flow rate of 4 to 21 m³/h.

€29.50 €35.70 Tax incl. €29.50 Tax excl.

Balsa wood Balsasud Core SG for infusion, thickness 25.40 mm (1")

Balsa wood Balsasud Core SG for infusion, thickness 31.8 mm (1.25")

MB31.8+Perf-1

BALSASUD® Core SG is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact...

Out-of-Stock

€80.45 €97.34 Tax incl. €80.45 Tax excl.

View

Balsa wood Balsasud Core SG for infusion, thickness 19,1 mm (3/4")

MB19.1+Perf-1

€56.80 €68.73 Tax incl. €56.80 Tax excl.

View

Balsa wood Balsasud Core SG for infusion, thickness 25.40 mm (1")

MB25.4+Perf

€69.70 €84.34 Tax incl. €69.70 Tax excl.

View

100 g/m2 Unidirectional Flax-Epoxy Prepreg VTC401-UDFLAX100-50%RW-600mm

SHD4303-600

SHD

VTC401 is an epoxy resin designed to provide initial curing at low temperature or fast curing at high temperatures with toughness, adhesion to honeycomb, and improved service temperatures, providing greater flexibility in component manufacturing. Typical applications: General – Cosmetics Roll width: 600 mm Type of reinforcement yarn: Unidirectional...

€55.40 €67.03 Tax incl. €55.40 Tax excl.

View

Sika® Primer-210 – Epoxy primer for aluminium and metals (250 ml)

155720

Solvent-based, non-pigmented epoxy primer for improving adhesion on aluminium and other metals. Designed as a pre-treatment for one-component polyurethane adhesives.

€45.00 €54.45 Tax incl. €45.00 Tax excl.

81 g/m 6K Carbon Braided Sleeve, diameter 120 mm

326 g/m 12K +-45º Carbon Braided Sleeve, diameter 200 mm (1 kg)

70147

200 mm diameter 12K Carbon Braided Sleeve. Ideal for the production of carbon tubes with epoxy, urethane-acrylate and vinyl ester resins. Aerial weight: 326 g/m

€139.00 €168.19 Tax incl. €139.00 Tax excl.

272 g/m 12K +-45º Carbon Braided Sleeve, diameter 125 mm (1 kg)

70146

125 mm diameter Carbon Braided Sleeve. Ideal for the production of carbon tubes with epoxy, urethane-acrylate and vinyl ester resins. Type of thread: 12K (12.000 filaments) Aerial weight: 272 g/m

Out-of-Stock

€125.00 €151.25 Tax incl. €125.00 Tax excl.

View

Home

Feedbacks

General rating

4.9 / 5

Based on 953 feedbacks

Orders:

4.9

Products:

4.9

View feedbacks...