Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38%RW Twill 2x2 of 416 g/m2
By buying this product you can collect up to
13
points.
Your cart will total 13
points that can be converted into a voucher of
€1.30.
MTC275 Prepreg is designed to give excellent clarity and surface finish out of autoclave. MTC275 can be supplied on a variety of fabrics and in UD format. To be combined with the surface prepreg MTM275-C245T-HQ-HS-3K-42%RW.

MTC275 Prepreg is designed to give excellent clarity and surface finish out of autoclave. MTC275 can be supplied on a variety of fabrics and in UD format. To be combined with the surface prepreg MTM275-C245T-HQ-HS-3K-42%RW.
Key Features
- Weight: 416 g / m2.
- Carbon type: 2 x 2 twill, 6K.
- Roll Width: 1250 mm.
- Content of epoxy resin: 38% by weight.
- Cure temperature from 85°C
- Service temperatures up to 100°C after postcure
- Low CTE and shrinkage
- Work life at 20°C: 28 days
- Storage life at -18°C: 12 months
- Very low VOC content – no added solvents during manufacture
Recommended Cure cycle: Dwell at 85°C for 2 hours ±0.5 (ramp rate of 1°C) followed by 130°C for 1 hour (ramp rate 2°C per minute).
The use of solid release film is recommended.
Maximum service temperature of the parts produced with this prepreg: 120 ºC.
Type of Supply
Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38%RW Twill 2x2 of 416 g/m2 x 1 m2, supplied rolled in cardboard box
Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38%RW Twill 2x2 of 416 g/m2 x 5 m2, supplied rolled in cardboard box
Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38%RW Twill 2x2 of 416 g/m2 x 25 m2, supplied rolled in cardboard box
- Type
- Twill
- Fire retardant
- No
- Width
- 125 cm
You might also like