Tax incl. Tax excl.
Balsa wood Diab GS CO 6,35 mm thick
Balsa wood Diab GS CO 6,35 mm thick

Balsa Wood D150 GS, thickness 6.35 mm

DIAB
Reference MB6.35-1
EAN 8431252109326
Stock 26 units
€26.00
€26.00 VAT excl. €31.46 VAT incl. · Spain
Tax excluded

By buying this product you can collect up to 3 point points. Your cart will total 3 points that can be converted into a voucher of €0.30.

Balsa is a high quality organic core material made from end grain balsa wood. The end grain, micro honeycomb structure offers exceptional shear and compressive strength. In addition Balsa offers good fatigue properties, high thermal and sound insulation and low FST (fire, smoke & toxicity) properties. Balsa is best suited for dynamic structures where performance and efficiency are important. All Balsa core materials are particularly easy to work using conventional woodworking tools. It can be drilled, milled, turned and sawn to close tolerances. Balsa is compatible with most resin and manufacturing processes. It is also suitable for elevated temperature cure prepreg systems.

Sheet Density (ASTM C 271): 155 kg/m3

Choose the type of supply

 
‎

 Calculate Shipping Cost

Balsa is a high quality organic core material made from end grain balsa wood. The end grain, micro honeycomb structure offers exceptional shear and compressive strength. In addition Balsa offers good fatigue properties, high thermal and sound insulation and low FST (fire, smoke & toxicity) properties. Balsa is best suited for dynamic structures where performance and efficiency are important. All Balsa core materials are particularly easy to work using conventional woodworking tools. It can be drilled, milled, turned and sawn to close tolerances. Balsa is compatible with most resin and manufacturing processes. It is also suitable for elevated temperature cure prepreg systems.

Sheet Density (ASTM C 271): 155 kg/m3

Sheet measures: 1220 x 610 x 6.35 mm

Type of supply

Balsa Wood D150 GS scrim x Sheet of 1220 x 610 x 6.35 mm (0.744 m2), supplied rolled in cardboard box

Balsa Wood D150 GS scrim x Box of 50 sheets of 1220 x 610 x 6.35 mm (37,2 m2)

26 Items
8431252109326

You might also like

Polyester resin Recapoli 953 TPA
Out-of-Stock
Resins for composite materials

Crystic 2-446MPALV low styrene emission pre-accelerated, thixotropic polyester resin

WRP2446MPALV
€138.25 €138.25 VAT excl.
Crystic 2-446MPALV is a pre-accelerated, thixotropic, spray viscosity polyester resin with low styrene emission. Its rapid wetout,low exotherm and fast hardening characteristics make it ideal for spray applications which require a fast mould turnround. Variants giving a range of geltimes and viscosities are also available. During the spray-up phase,...
View product
POLYESTER RESIN Crystic 489PALVCC
Resins for composite materials

Crystic 489 PABTLV Hand Lay-Up Isophthalic Polyester Resin

Scott Bader
WRP1489
€14.05 €14.05 VAT excl.
Crystic 489 PABTLV is a thixotropic, isophthalic and pre-accelerated polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for moulding boat hulls with outstanding durability and superior blister resistance. Crystic 489 PABTLV is approved by Lloyd’s Register of Shipping for use in the construction of craft under...
View product
LSM7000 Vacuum Bag Sealant Tape (210 °C), width 25 mm
Vacuum bagging materials for composites

LSM7000 Vacuum Bag Sealant Tape (210 °C), width 25 mm

MESM7000-25
€19.00 €19.00 VAT excl.
Sealant tape for vacuum bag with heat resistance up to 210 °C. Polyvalent and economic sealant tape recommended for high temperature cures up to 210°C (autoclave cycles). Economic and ideal for use on composite or metallic tools Easy to release from the tools once the mould has cooled down to room temperature. Rolls of 25 mm x 3 mm x 12.5 linear...
View product
Infusion polyester resin recapoli 955 INF
Resins for composite materials

Recapoli 955 INF-G DCPD Polyester Resin for vacuum infusion

WRP0955IG
€14.00 €14.00 VAT excl.
Recapoli 955 INF-G is a very low-viscosity unsaturated DCPD based polyester resin, ortho-phthalic type, suited for vacuum infusion or injection (RTM). It is characterized by low volumetric shrinkage after curing, allowing for the production of high-quality surface parts. It enables the manufacturing of composite parts with high fiber content and therefore...
View product

Customers who bought this product also bought:

Product added to wishlist
WhatsApp
Product added to comparison.