Tax incl. Tax excl.
Polyester resin Crystic U 904 LVK for injection and infusion

Crystic U904LVK30 RTM & Infusion Orthophthalic Polyester Resin

WRP090430-5
4 Items
€45.06

By buying this product you can collect up to 4 points. Your cart will total 4 points that can be converted into a voucher of €0.40.

€45.06 Tax incl. €37.24 Tax excl.
Tax included

Crystic Resin U904LVK30 is a low viscosity pre-accelerated orthophthalic polyester resin developed for use in RTM, RTM light and infusion tecniques. It has been designed for cure with standard MEKP and gives suppressed exotherm characteristics with fast cure. 

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

Crystic Resin U904LVK30 is a low viscosity pre-accelerated orthophthalic polyester resin developed for use in RTM, RTM light and infusion tecniques. It has been designed for cure with standard MEKP and gives suppressed exotherm characteristics with fast cure.

Gel time of 30 min at 25 ºC with 1,5% of MEKP catalyst (Luperox K1S or Butanox M50)

Heat Deformation temperature (HDT): 80 °C.

Type of supply

Crystic Resin U904LVK30 RTM & Infusion Ortho Polyester Resin x 5 kg, supplied with 100 g of MEKP

Crystic Resin U904LVK30 RTM & Infusion Ortho Polyester Resin x 25 kg, supplied with 0.5 kg of MEKP

Crystic Resin U904LVK30 RTM & Infusion Ortho Polyester Resin x 225 kg, supplied with 5 kg of MEKP

UV resistance
No
Colour
Grey
Flexible
No
Type
ORTHO
Tixo
No
Low shrinkage
No
Fire retardant
No
Low styrene emission
No
Lloyd´s Register or Norske Veritas
No
Food contact
No
4 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Product added to wishlist