By buying this product you can collect up to 3 points. Your cart will total 3 points that can be converted into a voucher of €0.30.
RESOLTECH 1200 is a state of the art laminating epoxy system, formulated without reactive diluents (primary cause of allergies) thus improving the H&S working conditions. It allows to manufacture small parts as well as large composite structures & tools with all the existing fibres. The system enables application by wet lay up, vacuum bagging and filament winding.
RESOLTECH 1200 / 1204 - 1206 - 1208 is a state of the art chemistry laminating epoxy system, formulated without reactive diluents (primary cause of allergies) thus improving the H&S working conditions. It allows to manufacture small parts as well as large composite structures & tools with all the existing fibers.
RESOLTECH 1200 is found to comply with:
For use in marine vessels in accordance with stated Rules/Standards. Also for use in rotor blade manufacture (wind energy).
Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL.
RESOLTECH 1200 / 1204 - 1206 - 1208 does not crystallize, these systems do not contain any CMR components and meet the latest requirements of European regulation & REACH.
With its adapted viscosity and its large range of reactivity, the system enables application by wet lay up, vacuum bagging and filament winding. A thixotropic version 1200T is available for applications such as vertical & overhanging laminates.
The hardeners 1204, 1206 and 1208 of this system have a mixing ratio of 35 parts for 100 parts of resin 1200 by weight. They are compatible and may be mixed together in order to adjust the reactivity needed.
After curing at room temperature the system 1200 / 1204 - 1206 - 1208 can be released directly from the mold. In order to accelerate the release after initial curing, a post cure at 40°C is possible. To obtain the optimum thermo mechanical properties a post cure at 60-80°C will be required.
Hardeners 1205HT and 1206HT will enable to obtain a TG of 130ºC after post cure making the 1200 a choice system for pre-preg tools.
The system RESOLTECH 1200 offers great flexibility of use with the available hardeners and will enable to reduce product’s stock while allowing production of tools & parts of all sizes.
Resoltech 1200 / 1204 Hand lay-up epoxy resin x (1 kg + 0.35 kg), gel time of 8h 45 minutes
Resoltech 1200 / 1204 Hand lay-up epoxy resin x (5 kg + 1.75 kg), gel time of 8h 45 minutes
Resoltech 1200 / 1204 Hand lay-up epoxy resin x (28 kg + 9,8 kg), gel time of 8h 45 minutes
Resoltech 1200 / 1208 Hand lay-up epoxy resin x (1 kg + 0.35 kg), gel time of 14 minutes
Resoltech 1200 / 1208 Hand lay-up epoxy resin x (5 kg + 1.75 kg), gel time of 14 minutes
Resoltech 1200 / 1208 Hand lay-up epoxy resin x (28 kg + 9,8 kg), gel time of 14 minutes
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.
* Shippings to Portugal will be always carried by Torrestir
Cookie preferences
Español
Français
Deutsch
Italiano
Português
