Tax incl. Tax excl.
PVC Foam M060.30SG, 30 mm thick for infusion
PVC Foam M060.30SG, 30 mm thick for infusion
PVC Foam M060.30SG, 30 mm thick for infusion
PVC Foam M060.30SG, 30 mm thick for infusion

PVC Foam M060.30SG, 30 mm thick for infusion

Reference M060.30SG-1
EAN
Stock 4 units
€75.00
€75.00 VAT excl. €90.75 VAT incl. · Spain
Tax excluded

By buying this product you can collect up to 9 point points. Your cart will total 9 points that can be converted into a voucher of €0.90.

M060.30SG, 30 mm is a PVC foam with a density of 60 kg/m³, ideal for the manufacturing of sandwich laminates made by vacuum infusion process. It is compatible with all kinds of thermosetting resins: polyester, vinyl ester, urethane-acrylate, epoxy, etc.

Sheets are supplied with a scrim at the back to hold all the foam squares together (grid scored).

Measures of sheets: 1225 x 1150 x 30 mm (1.41 m²).

Choose the type of supply

 
‎

 Calculate Shipping Cost

M060.30SG, 30 mm is a PVC foam with a density of 60 kg/m³, ideal for the manufacturing of sandwich laminates made by vacuum infusion process. It is compatible with all kinds of thermosetting resins: polyester, vinyl ester, urethane-acrylate, epoxy, etc.

Sheets are supplied with a scrim at the back to hold all the foam squares together (grid scored).

Measures of sheets: 1225 x 1150 x 30 mm (1.41 m²).

Boxes of 40 sheets.

Type of supply:

PVC foam M060.30SG x 1 sheet of 1225 x 1150 x 30 mm (1.41 m²), supplied rolled in a cardboard box.

PVC foam M060.30SG x Box of 40 sheets of 1225 x 1150 x 30 mm (56.35 m²).

4 Items

You might also like

Triaxial glass fabric (0/+45/-45º) de 750 g/m2
Reinforcement fibres

750 g/m2 Triaxial Stitched Glass Fabric (0º/+45º/-45º), 127 cm wide

WTVT750
€8.50 €8.50 VAT excl.
Triaxial glass fabric of 750 g/m2 built of three layers of unidirectional fabric oriented at 0º, +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
View : 750 g/m2 Triaxial Stitched Glass Fabric (0º/+45º/-45º), 127 cm wide
Biaxial carbon fabric + 45 / -45, 50 K and 300 g / m2
Home

Biaxial Carbon Fabric +45/-45º, 50 K of 300 g/m2, width 127 cm

WTCBX300
€47.80 €47.80 VAT excl.
300 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Suitable for manufacturing of composite parts and tools with epoxy, urethane-acrylate or vinyl ester resins by hand lay-up, infusion or RTM. Type of...
View : Biaxial Carbon Fabric +45/-45º, 50 K of 300 g/m2, width 127 cm
Distribution woven mesh with perforated mold release film INFUPLEX FLONET 145 cm wide
Vacuum bagging materials for composites

INFUPLEX FLONET Vacuum Infusion Complex Infusion Mesh, 72.5 cm wide

INFUPLEXFL072
€22.68 €22.68 VAT excl.
INFUPLEX are multilayer systems used in manufacturing processes for vacuum infusion of composite materials. The systems combine two vacuum consumables into a two-layer unit: a perforated film ELA20P1, permeable to resin and gases; and a net bleeder on top. Roll width: 72.5 cm.
View : INFUPLEX FLONET Vacuum Infusion Complex Infusion Mesh, 72.5 cm wide
Resoltech 1050 Infusion Epoxy Resin 1053S
Resins for composite materials

Resoltech 1050 Infusion Epoxy Resin

RESOLTECH
WRE1050
€50.81 €50.81 VAT excl.
The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing. This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding.
View : Resoltech 1050 Infusion Epoxy Resin
Product added to wishlist
WhatsApp
Product added to comparison.