INFUPLEX FLONET Vacuum Infusion Complex Infusion Mesh, 72.5 cm wide

INFUPLEX are multilayer systems used in manufacturing processes for vacuum infusion of composite materials. The systems combine two vacuum consumables into a two-layer unit: a perforated film ELA20P1, permeable to resin and gases; and a net bleeder on top. The glue used to assemble the component is neutral: soluble with polyester resins and doesn’t affect the resin flow. INFUPLEX is de-oiled and heat set: there is no risk of pollution with INFUPLEX. INFUPLEX allows an exceptional economy of time at every stage of manufacturing process. This easy-to-use solution eliminates the technical risk of overlap or of the omitted layer. INFUPLEX is also a very simple solution to lay up the bagging materials. Save time and optimise the production with INFUPLEX.

• Roll width: 72.5 cm
• Roll Length = 100 m 
• Type of release film perforations: P0 (Diameter: 800 microns)
• Thickness: 1100 micron
• Weight: 139 g/m2
• Resistant styrene
• Maximum temperature: 100 °C
• Resin consumption: +-350 g/m2

Type of supply

INFUPLEX FLONET Vacuum Infusion Complex Net 72.5 cm wide x 5 linear m, supplied rolled in cardboard box.

INFUPLEX FLONET Vacuum Infusion Complex Net 72.5 cm wide x 25 linear m, supplied rolled in cardboard box.

INFUPLEX FLONET Vacuum Infusion Complex Net 72.5 cm wide x 100 linear m, supplied rolled in cardboard box