Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
Substrate and moisture
Check substrate preparation and permitted moisture. A moisture-resistant resin does not authorise application over water.
Coatings / Concrete · indoor floors
Epoxy floors and mortars
Before coating a floor, define the substrate, its moisture and intended use. Choose between mortar, a multilayer system or a decorative finish and check layer compatibility, from primer to final finish.
View selected materials ↓
Before you buy
Three points to guide your choice
Mortar or coating
A silica-filled mortar is not equivalent to pouring neat resin as a self-levelling floor.
Layers and service
Define thickness, adhesion, finish and cure before opening the floor to use. Confirm layer compatibility.
What to buy for this project
Selected materials
Compare their purpose and conditions of use.
Check sizes and options on each product page.
Primer or sealer · system-dependent
Fetadit PA-47 Water-Based Epoxy Primer
PA-47 prepares floors and walls for indoor coatings and paints.
Before choosing
Prepare the substrate and confirm compatibility with the next layer. Allow water to evaporate and the film to dry before recoating; for laminates, the description specifies at least 24 hours at 22 °C. Residual moisture in concrete may be acceptable, but standing or flowing water is not.
Mortar and multilayer flooring · grey RAL 7035
FETADIT MO 16 GREY RAL 7035 Epoxy Flooring Resin
MO-16 for silica-filled epoxy mortars, repairs and multilayer systems. This reference is grey RAL 7035.
Before choosing
Spread the mortar over FETADIT IMP while it is still uncured. Once the mortar has hardened, seal its porosity with a compatible finish; PA-47 is among the sealing options. Aggregate and sealing are part of the system and determine flooring performance.
Fetadit PA-47 Water-Based Epoxy Primer: One option for sealing hardened mortar. The primer specified beneath the mortar is FETADIT IMP.
Binder for mortars and coatings
Castropox 4307/2203 Moisture-Insensitive Epoxy Resin
4307/2203 system for filled epoxy mortars and coatings.
Before choosing
The substrate must be dry and free from grease, oil and rust. On metal, tiles or other difficult-to-bond substrates, apply PA-47 first and let the primer dry for 24 hours before applying this system.
Fetadit PA-47 Water-Based Epoxy Primer: Primer for difficult-to-bond substrates; allow to dry before the 4307 system.
Binder · filled mortars and coatings
Castropox 4307/1209 General-Purpose Epoxy Resin
Castropox 4307/1209 accepts mineral fillers for industrial floor mortars and coatings.
Before choosing
Aggregate type and quantity determine whether you obtain a coarse mortar or a more fluid coating. On metal, tiles or other difficult-to-bond substrates, the 4307/1209 data sheet specifies PA-47 first and 24 hours of drying. Work above 10 °C.
Fetadit PA-47 Water-Based Epoxy Primer: Primer for difficult-to-bond substrates; allow to dry before the 4307 system.
Mortar and multilayer flooring · papyrus white RAL 9018
FETADIT MO 16 PAPYRUS WHITE RAL 9018 Epoxy Flooring Resin
MO-16 papyrus white RAL 9018 for silica-filled epoxy mortars, concrete repairs and indoor multilayer flooring.
Before choosing
Spread the mortar over FETADIT IMP while it is still uncured. Once the mortar has hardened, seal its porosity with a compatible finish; PA-47 is among the sealing options. Aggregate and sealing are part of the system and determine flooring performance.
Fetadit PA-47 Water-Based Epoxy Primer: One option for sealing hardened mortar. The primer specified beneath the mortar is FETADIT IMP.
Mortar and multilayer flooring · grey RAL 7033
FETADIT MO-16 GREY RAL 7033 Self-Levelling Epoxy Flooring Resin
MO-16 grey RAL 7033 for silica-filled epoxy mortars, concrete repairs and indoor multilayer flooring.
Before choosing
Spread the mortar over FETADIT IMP while it is still uncured. Once the mortar has hardened, seal its porosity with a compatible finish; PA-47 is among the sealing options. Aggregate and sealing are part of the system and determine flooring performance.
Fetadit PA-47 Water-Based Epoxy Primer: One option for sealing hardened mortar. The primer specified beneath the mortar is FETADIT IMP.
Flexible epoxy coatings and putties
Castropox 4307 FLEX / 1209 Flexible Epoxy Resin
Flexibilised epoxy system for floor coatings and putties where more flexibility than a rigid epoxy is needed.
Before choosing
Flexibility means lower hardness and chemical resistance, and poorer hot-water resistance. Consider these service conditions before choosing it for flooring.
Clear finish · indoor floors
Castropox Clear Cast Clear Epoxy Resin
Clear Cast A/B for indoor floors with a high-gloss clear layer that leaves the underlying finish visible.
Before choosing
Apply up to 3 mm per layer on a sanded, clean and degreased substrate. On wood and other porous substrates, prepare the surface with 1010/1014 water-based epoxy primer to reduce air release and bubbles. Allow the primer to dry and the finish to cure before putting the floor into service.
Resoltech 1010 / 1014 Water-Based Epoxy Primer: Primer for wood and other porous substrates before the Clear Cast coating.
You may also be interested in
All applications →
Furniture · worktops · art
Clear finishes
Clear finishes for furniture, worktops and laminates, plus gelcoat for forming the surface of moulded parts.
6 materials · View application
EPS · models · scenery
Polystyrene coating
Resin with documented adhesion to expanded polystyrene and polyurethane foam for coating projects.
1 material · View application
Cavities · panels · insulation
Foam filling and insulation
Rigid polyurethane foam for cavity filling and insulation projects using the documented process.
1 material · View applicationDoes your project have other requirements?
Tell us about the process, materials and working conditions.
