Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
Core and reinforcement
Check compatibility with the foam, fabric and any decoration or insert before laminating.
Composites and marine / Clear laminating
Surfboards and watersports boards
To manufacture a surfboard, windsurf or kiteboard, the resin must wet out the reinforcement and be compatible with the core. Choose a system documented for clear laminating and match the hardener to the working time you need.
View selected materials ↓
Before you buy
Three points to guide your choice
Laminating time
The available time must allow all reinforcement to be wetted out and consolidated. Account for workshop temperature and board size when planning the lay-up.
Laminate and finish
Fibre wet-out and the finishing coat are separate operations; follow the conditions for each.
What to buy for this project
Selected materials
Compare their purpose and conditions of use.
Check sizes and options on each product page.
Clear laminating
Resoltech 1070 Clear Hand Lay-up Epoxy Resin
1070(S) CLEAR system for laminating surfboards, windsurf and kiteboards and producing clear laminates.
Before choosing
Allows laminating and curing at room temperature. Allow for post-curing if you need improved thermal performance. On an already cured laminate without peel ply, sand, clean and degrease before adding another layer.
Optical Brightner Additive for Epoxy Resins x 50 ml: Optional in the topcoat over white foam cores. It can change the colour of painted or decorated boards and exposed fibres; test the optical effect first.
1070 CLEAR / 1076 system
Resoltech 1070/1076 Clear Hand Lay-up Epoxy Resin
1070/1076 system for hand laminating and coating boards.
Before choosing
If finishing the board with a polyester topcoat, the data sheet supports applying it over this laminate. For a clear finish, use glass fabric with a suitable treatment: transparency also depends on the reinforcement.
Optical Brightner Additive for Epoxy Resins x 50 ml: Optional in the topcoat over white foam cores. It can change the colour of painted or decorated boards and exposed fibres; test the optical effect first.
You may also be interested in
All applications →
Glass · carbon · aramid
Fibre-reinforced laminated parts
Epoxy, polyester and vinyl ester resins for making fibre-reinforced parts by hand lay-up or spray-up.
17 materials · View application
Furniture · worktops · art
Clear finishes
Clear finishes for furniture, worktops and laminates, plus gelcoat for forming the surface of moulded parts.
6 materials · View application
Wood · laminating and bonding
Wood-epoxy construction
Epoxy systems for laminating, coating and bonding wood with suitable reinforcement and fillers.
3 materials · View applicationDoes your project have other requirements?
Tell us about the process, materials and working conditions.
