Cookie preferences
Español
Français
Deutsch
Italiano
Português
Shopping Cart
Wood condition
Work on dry, clean, sound wood. On previously coated surfaces, check adhesion and compatibility of the existing coating before laminating or bonding.
Composites and marine / Wood · laminating and bonding
Wood-epoxy construction
Wood-epoxy construction combines wood, resin and fibre reinforcement where the design requires it. Selection depends on whether you will wet out, laminate or prepare a filled joint.
View selected materials ↓
Before you buy
Three points to guide your choice
Mix function
Wetting out fabric and filling a joint require different behaviours. Fillers are selected for the specific function.
Part design
On boats and load-bearing parts, laminates and joints require their own engineering design.
What to buy for this project
Selected materials
Compare their purpose and conditions of use.
Check sizes and options on each product page.
Laminating and wood construction
Resoltech 1020 Hand Lay-up Epoxy Resin
Resoltech 1020 can coat wood and form joints with suitable fillers in wood-epoxy construction projects.
Before choosing
For fillet joints, the resin needs fillers or thickeners to give it an adhesive consistency. When laminating on a cured surface without peel ply, sand, clean and degrease before continuing.
1020 ECO alternative
Resoltech 1020 ECO Hand Lay-up Epoxy Resin
1020 ECO system for hand lay-up and wood-epoxy construction.
Before choosing
Plan laminating and bonding separately: 2040G ECO paste can be used for fillet joints and 3350 ECO thixotropic adhesive for other bonds. Prepare surfaces and design each joint for the loads it must carry.
Resoltech 3350 ECO / 3358T ECO High-Toughness Epoxy Adhesive: Thixotropic adhesive for project joints that require a bonding paste.
Resoltech 2040G ECO/2045G ECO Structural Epoxy Adhesive for Wood and Fillet Joints: Adhesive paste for wood fillet joints in the 1020 ECO system.
Wood laminating · vertical or overhead
Resoltech 1020T Thixotropic Hand Lay-up Epoxy Resin
1020T allows work on vertical or overhead faces of wood-epoxy structures without the resin sagging easily.
Before choosing
For fillet joints, add fillers suited to the joint. When continuing over a cured layer without peel ply, sand, clean and degrease before applying the new laminate.
You may also be interested in
All applications →
Wood + resin
River tables
Choose a casting resin that combines wood and transparency, taking the actual volume of your table into account.
1 material · View application
Glass · carbon · aramid
Fibre-reinforced laminated parts
Epoxy, polyester and vinyl ester resins for making fibre-reinforced parts by hand lay-up or spray-up.
17 materials · View application
Furniture · worktops · art
Clear finishes
Clear finishes for furniture, worktops and laminates, plus gelcoat for forming the surface of moulded parts.
6 materials · View applicationDoes your project have other requirements?
Tell us about the process, materials and working conditions.
