Resoltech 1800 Infusion Epoxy Resin
By buying this product you can collect up to 5 points. Your cart will total 5 points that can be converted into a voucher of €0.50.
RESOLTECH 1800 is an epoxy system for infusion and injection applications with extremely low viscosity for fast and secure reinforcements wetting.

RESOLTECH 1800 is an advanced infusion and injection epoxy resin system with an extremely low viscosity for fast and safe wetout by infusion and injection. It features high mechanical properties, a TG of up to 130°C and up to 5 h 30 min of infusion or injection time. A great property of the system is its constant low viscosity right until gel time. It therefore offers reliable impregnation and air release throughout the infusion or injection process. Suitable for very large composite parts.
Main features:
- Ultra low viscosity (180mPas)
- Optimised for the infusion of large parts through the laminate
- TG up to 130°C.
- Requires a post cure at 70°C prior to releasing
- A 70°C postcure will provide a 130°C TG with the1805 hardener.
Main applications:
- Large marine structures.
- Wind turbine blades.
- Moulds for prepreg production.
- Glass, aramid and carbon laminates, cored and uncored.
- RTM, KIS, SCRIMP, DIAB, RIFT and other infusion & injection processes.
Type of supply
Resoltech 1800/1808 infusion epoxy resin x (1 + 0.38) kg, gel time of 18 min
Resoltech 1800/1808 infusion epoxy resin x (5 + 1.9) kg, gel time of 18 min
Resoltech 1800/1808 infusion epoxy resin x (25 + 9.5) kg, gel time of 18 min
Resoltech 1800/1805 infusion epoxy resin x (1 + 0.17) kg, gel time of 2 h and 4 min
Resoltech 1800/1805 infusion epoxy resin x (5 + 0.85) kg, gel time of 2 h and 4 min
Resoltech 1800/1805 infusion epoxy resin x (25 + 4.25) kg, gel time of 2 h and 4 min
- Heat resistance
- Between 75 and 120ºC
- Processing time
- Up to 30 min
Up to 120 min - UV resistance
- No
- Colour
- Slightly yellowish
- Flexible
- No
ADR (DANGEROUS GOODS)
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.
* Shippings to Portugal will be always carried by Torrestir