Tax incl. Tax excl.
Epoxy Resin RESOLTECH 1080S

RESOLTECH 1080S Epoxy Laminating & Infusion Resin

WRE1084-1.33
3 Items
€55.90

By buying this product you can collect up to 5 points. Your cart will total 5 points that can be converted into a voucher of €0.50.

€55.90 Tax incl. €46.20 Tax excl.
Tax included

RESOLTECH 1080S is the highest modulus epoxy system formulated to manufacture high performance, rigid, lightweight structures with glass, carbon, aramid and basalt fibres with or without post-curing. Optimized with a low reactivity, low viscosity and excellent air release properties, is suitable for the manufacture any size structures and composite parts by hand layup, infusion and RTM.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 4 feedback(s)

RESOLTECH 1080S is the highest modulus epoxy system formulated by RESOLTECH to manufacture high performance, rigid, lightweight structures with glass, carbon, aramid and basalt fibres with or without post-curing.

Using this novolac based epoxy resin will enable to reduce the amount of reinforcement fibre used, resulting in lighter, more rigid but also cheaper parts in spite of its higher price compared to more common Bisphenol A & F based resins.

This new generation system, optimized with a low reactivity, low viscosity and excellent air release properties, is suitable for the manufacture any size structures and composite parts by hand layup, infusion and injection moulding while guaranteeing low toxicity working conditions to the user and ease of use thanks to its high wetting properties.

It features an adjustable working time from 2h30 to 8h30 with its range of hardeners.

It is possible to release the parts from the mould without postcuring. The maximum thermo mechanical properties of the laminate will be obtained after a postcuring cycle to obtain a final Tg of 110 ºC.

RESOLTECH 1080S is recommended for the production of marine foils, secondary laminations of chain plates, production of lightweight & rigid skiffs or high performance kayaks & outriggers where the weight/rigidity is key.

The 1080S is used on many Dakar wining rally cars, all types of RC models but also for the production of helicopter, gyrocopter & airplane propellers.

Gel time with 1082: 8 h 33 min at 23 °C for 50 g mixture

Gel time with 1084: 2 h 3 min at 23 °C for 50 g mixture

Type of supply

Resoltech 1080S (1 kg) + 1082 (0,33 kg), gel time of 8 h 33 min

Resoltech 1080S (5 kg) + 1082 (1,65 kg), gel time of 8 h 33 min

Resoltech 1080S (27 kg) +1082 (8,91 kg), gel time of 8 h 33 min

Resoltech 1080S (1 kg) + 1084 (0,33 kg), gel time of 2 h 30 min

Resoltech 1080S (5 kg) + 1084 (1,65 kg), gel time of 2 h 30 min

Resoltech 1080S (27 kg) + 1084 (8,91 kg), gel time of 2 h 30 min

Heat resistance
Between 75 and 120ºC
Processing time
Above 2 hours
Above 8 hours
UV resistance
No
Colour
Slightly yellowish
Flexible
No
3 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Download Technical Data Sheet             

                              

Resoltech 1080S                           

                      

Download Safety Data Sheets                   

                                             

Resoltech 1080 

Resoltech 1082 

Resoltech 1084 

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -  
Aporta gran rigidez a los laminados de fibra de carbono.
Score:  
 
 -  
Aporta mucha rigided a las piezas de carbono con postcurado a temperatura ambiente.
Score:  
 
 -  
Muy buen epoxy, incluso para trabajar sin post-curado termico
Score:  
 
 -  
muy buen producto
Product added to wishlist