Adhesives and fillers for composites

Structural epoxy adhesive for secondary laminations, even under extreme temperature conditions (very low) and high humidity. It is applied with conventional silicone guns. Above and under water cure capable system. Also ideal for bonding stone or concrete containing moisture.

Adhesives and fillers for composites

C -Patch Structural Epoxy Adhesive x 250 ml cartridge

WBADH

€72.00 €72.00 VAT excl.

Carbo Spray masilla de poliéster pistola para piezas de carbono

Adhesives and fillers for composites

Carbo Spray Polyester Putty for spray applications on carbon parts

€74.20 €74.20 VAT excl.

Polyester putty for spay applications ideal for carbon fibre parts refurbishing with surface pinholes.

Home

Resoltech 8050L/8059 ultra fast epoxi filler

RESOLTECH 8050L / 8059 is a ultra fast curing and easy sanding filler. It is a premium choice to substitute polyesters filler. Due to its very fast curing characteristics it is best to use in cartridges and it is particularly suitable for fast repairs of cracks in mould, finishing of small surface defects, caulking between assembly elements... It is...

K8050L-400

€75.60 €75.60 VAT excl.

Adhesives and fillers for composites

Crestafix Poly-Fair® F26 Polyester Fairing Compound for the Marine and Tooling Industry

Poly-Fair F26 is a water resistant, low-density polyester-based fairing compound. Poly-Fair F26 has good adhesion to cured fiberreinforced polyester and vinylester laminates. Poly-Fair sands easily, gives a hard finish after a full cure, yet is not brittle and has good impact strength. Poly-Fair F26 is supplied as “R” regular version, “S” summer version.

CrestafixF26EU

€79.25 €79.25 VAT excl.

Resoltech 3350XT / 3357XT Epoxy adhesive

Adhesives and fillers for composites

Resoltech 3350XT / 3357XT High Performance Structural Epoxy Adhesive

WRE3350XT

€83.67 €83.67 VAT excl.

Epoxy adhesive of high strength and toughness for structural applications.

Designed especially for Tensor crosslinking contact adhesives, like TensorGrip M01, this 4m stainless steel spray hose is perfect for use near a canister. This premium moisture-block hose is corrugated with stainless steel, providing it with added durability, so you’ll enjoy a hose that’s perfect for all industrial situations.

Home

4 m Stainless Steel Braided Spray Hose for TensorGrip M01 Adhesive

TSP61026

€85.50 €85.50 VAT excl.

Adhesives and fillers for composites

Resoltech 2040G ECO/2045G ECO Structural Adhesive Epoxy for wood bonding & Structural Fillet Joint

The RESOLTECH 2040G is a structural adhesive paste specifically formulated for fillet joints on wood. It is also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to its cohesion and high adhesion properties.

WRE2040

€87.48 €87.48 VAT excl.

Use the 5,5 m spray hose in heavy industrial situations and you’ll enjoy great and consistent performance. Even when used day-in and day-out, the hose will maintain excellent flexibility and durability. With a lengthe of 5.5 m, it’s suitable for almost any adhesive job. Recommeded for INFUTAC infusion and RTM adhesives together with INFUTACGUN.

4 m long Black Rubber Hose for Infusion & RTM Adhesives TC42, TC43 and TC49

Home

5,5 m long Black Rubber Hose for Infusion & RTM Adhesives INFUTAC

WINFUTACHOS5

€99.75 €99.75 VAT excl.

Home

INFUTACGUN Professional Gun for INFUTAC Infusion Fixing Adhesive of 22 liters

WINFUTACGUN

€243.60 €243.60 VAT excl.

Spray gun to achieve an even fan. It is ideal for the application of the 22 liter INFUTAC adhesive used to fix tissues in infusion processes.

ALEXIT® BladeRep Profile Filler 3 is a solvent free, two-component polyurethane filler designed to be used for filling and fairing on GRP substrates. This non-porous filler cures to an easily sandable surface.

Adhesives and fillers for composites

ALEXIT® BladeRep Profile Filler 3 Polyurethane Putty

ALEXIT Bladerep

WPUBRP3

€546.30 €546.30 VAT excl.

Adhesives and fillers for composites

Alexit Bladerep Profile Filler 3K three component Polyurethane Filler x 26 kg

ALEXIT Bladerep

€584.65 €584.65 VAT excl.

ALEXIT® BladeRep Profile Filler 3K is a solvent free, three-component, fast drying polyurethane filler designed to be used for filling and fairing on GRP substrates.

Crestabond M1-02 two component acrylic adhesive

Out-of-Stock

Adhesives and fillers for composites

Crestabond M1-02 two component acrylic adhesive

€16.00 €16.00 VAT excl.

Crestabond M1-02 is a toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals.

Crestafix 621CC 45 urethane acrylate / isophthalic polyester bonding paste

Out-of-Stock

Adhesives and fillers for composites

Crestafix 621CC 45 urethane acrylate / isophthalic polyester bonding paste

The Crestafix 621CC range is a pre-accelerated urethane acrylate / isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP mouldings.

WRPM62145

€16.15 €16.15 VAT excl.

Crestabond M1-05 Black Methacrylate Adhesive

Out-of-Stock

Acrylic and methacrylate adhesives

Crestabond M1-05 Black Methacrylate Adhesive

WCR005/50

€17.50 €17.50 VAT excl.

Black methacrylate adhesive for bonding metals (aluminum, steel , etc.), plastic (ABS , polycarbonate, PVC and methacrylate) and FRP (reinforced plastics: fiberglass composites, carbon, etc.).

Crestabond M1-20 Black Methacrylate Adhesive

Out-of-Stock

Acrylic and methacrylate adhesives

Crestabond M1-20 Black Methacrylate Adhesive

WCR0020/50

€19.50 €19.50 VAT excl.

Black methacrylate adhesive for bonding metals (aluminum, steel , etc.), plastic (ABS , polycarbonate, PVC and methacrylate) and FRP (reinforced plastics: fiberglass composites, carbon, etc.).

Quick Mix Multifix is a two component cyanoacrylate adhesive ideal for various repairs. It has the best adhesive properties on many different materials. Fast curing Extremely shock resistant Large filling capacity For fast professional repairs

Cyanoacrylate adhesive Quick Mix Multifix 10g

Out-of-Stock

Home

Cyanoacrylate adhesive Quick Mix Multifix 10g

5006-001094

€28.15 €28.15 VAT excl.

Out-of-Stock

Adhesives and fillers for composites

Crestabond Adhesive PP-04

Crestabond PP-04 is a structural adhesive designed for bonding substrates of low surface energy such as polypropylene (PP), polyethylene (PE) and other difficult plastic bonding, commonly known as thermoplastic polyolefins (POT).

WCRETABONDPP04

€28.65 €28.65 VAT excl.

ALEXIT® BladeRep® Profile Filler 5 is a solvent free, two-component polyurethane filler designed to be used for filling and fairing on GRP substrates. This non-porous filler cures to an easily sandable surface.

Out-of-Stock

Adhesives and fillers for composites

ALEXIT® BladeRep Profile Filler 5 two-component polyurethane filler

WPUBR5-4

€29.95 €29.95 VAT excl.

Crestomer 1153 PA Urethane acrylate adhesive

Out-of-Stock

Adhesives and fillers for composites

Crestomer 1153 PA Urethane Acrylate Adhesive

Crestomer 1153PA is a highly thixotropic, pre-accelerated, two-component structural adhesive. It has been developed from the chemistry of unsaturated acrylates urethane dissolved in styrene monomer.

WCR1153

€35.70 €35.70 VAT excl.

Use the 4 m spray hose in heavy industrial situations and you’ll enjoy great and consistent performance. Even when used day-in and day-out, the hose will maintain excellent flexibility and durability. And with an 4 m length, it’s suitable for almost any adhesive job. recommeded for TensorGrip TC42, TC43 and TC49 infusion and RTM adhesives.

Out-of-Stock

Home

4 m long Black Rubber Hose for Infusion & RTM Adhesives TC42, TC43 and TC49

TSP61024

€55.00 €55.00 VAT excl.

Out-of-Stock

Adhesives and fillers for composites

Resoltech 2040G/2045G Structural Adhesive Epoxy for wood bonding & Structural Fillet Joint

WRE2040

€56.50 €56.50 VAT excl.

ALEXIT® BladeRep® LEP 10 is specifically designed one-layer coating with excellent abrasion and erosion resistance. This two-component, solvent free polyurethane product has superior elasticity and flexibility for long-term leading edge protection.

Out-of-Stock

Adhesives and fillers for composites

ALEXIT® B, ladeRep® LEP 10 RAL 7035, Leading Edge Protection Coating for Wind Blades

54210.7035.7.970

€60.50 €60.50 VAT excl.

Out-of-Stock

Primers for composites, moulds and substrates

Resolcoat 3010T/3014T Epoxy High Build Surfacer

RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats.

WRE3010

€66.23 €66.23 VAT excl.